Press enter to search.
LUCKYTECH posted an answer for this Royal 29307U Calculator:
"The selector you are asking about is the "decimal selector". The result displayed/printed,..."
"what is the default setting for the f cut 5/4
and the 4320 add 2
I don't know..."
LUCKYTECH posted an answer for this Smith Corona Wordsmith 200 Typewriter:
"my typewriter smith corona 2000 is at a repair shop now cost to fix $440.00 i feel this is..."
"I would recommend you purchase a new machine from a local office depot type store. For..."
LUCKYTECH posted an answer for this Brother Office Equipment & Supplies:
"Remove and inspect the ribbon cartrige, wind the knob and make sure that the ribbon moves..."
"You must have the carrier at the exact margin in order to release it. To release the left..."
"That character is normally available as a SHIFT lettr "2". If this doesn't prin and you..."
LUCKYTECH posted an answer for this Brother GX-6750 Typewriter:
"Removed and reinstall the Daisywheel. Inspect the ribbon and lift-off tape to eliminate..."
"The letters on the Daisywheel have slightly curved faces to match the curvature of the..."
LUCKYTECH posted an answer for this Brother SX-4000 Typewriter:
"The typewriter will print the incorrect letter, or the face of the hammer if it does not..."
LUCKYTECH posted an answer for this Brother EM-630 Typewriter:
"When turned on the carrier must move to the left side frame, where it seneses the LEFT..."
LUCKYTECH posted an answer for this IBM Office Equipment & Supplies:
"If your IBM is a Selectric (golf ball) typewriter AND you are mechanically inclined, you..."
LUCKYTECH posted an answer for this Olympia Startype 3 Typewriter:
"Near the Left platen knob there is a selector lever to select the line spacing. Ensure..."
LUCKYTECH posted an answer for this Brother EM-530 Typewriter:
"You must first position the carrier to where you would like the margin to be set, so if..."
LUCKYTECH posted an answer for this Lexmark Office Equipment & Supplies:
"Depending which Model of Lexmark. Try Depress and HOLD the Store key and press one of..."
LUCKYTECH posted an answer for this Office Equipment & Supplies:
"There is no definite time.It is extremely important that the internal temperature of the..."
"You can purchase a universal power adapter at any electronics supply store. Make sure to..."
"The switch is mounted on a circuit board and has come unsoldered or has broken solder pad...."
"Sounds like the machine may have a staple or paper clip on the electronic circuit board...."
LUCKYTECH posted an answer for this IBM Wheelwriter 30 Typewriter:
"The problem is either something is interfering with the carrier movement OR the carrier..."
LUCKYTECH posted an answer for this Brother ML-300 Typewriter:
"I assume by "flywheel", you are referring to the "printwheel" which is removable from the..."
"Check your local phonebood for typewriter repair shops. The typewriter you have iwas..."
LUCKYTECH posted an answer for this Olympia Mastertype 3 Typewriter:
"Inspect the spacebar paralell guide wire. When depressing the spacebar on the right or..."
"Make certain the printwheel is latched fully into position. Observe the hammer movement..."
"There are many possible causes for this. First, observe the printing. If the hammer is..."
"Turn off the power. Check inside the machine for staples, paper clips etc. that could be..."
"Remove and observe the ribbon, wind the feedwheel to see if the ribbon if moving at all...."
"In general, there are two possible causes for this symptom. 1. The ribbon is not fully in..."
"The hammer may be coming to rest into or otherwise be interfering with the movement of the..."
LUCKYTECH posted an answer for this Smith Corona Office Equipment & Supplies:
"Sounds like the correction tape is not installed properly. Try remving and reinstalling it..."
"Check that the carriage release levers have freedom are are not binding. Also the tab key..."
Load more activity...
9,267 people helped
View all achievements