Press enter to search.
Peter posted an answer for this Fisher and Paykel Washing Machines:
"It would help if you gave the model number. If it is a normal washsmart top load washing..."
Peter posted an answer for this Fisher and Paykel GWL11 Top Load Washer:
"It thinks the display panel is not in place due to a bad connection on the plug. With the..."
"More info needed. What is the model number? Is it a top or front load machine? What is the..."
"Not enough info given to answer properly. Where is the water leaking from? Can you see..."
"When a new control board is fitted, it needs to be programmed to tell it what size the..."
"How can someone say it is definitely a control board faulty when they don't even know what..."
"That means that power is being applied to the drain pump when it shouldn't be. There is..."
"It beeps to tell you there is an error. While it is beeping & before pressing any..."
"Error code 136 motor stall. Can be caused by several things. 1. Faulty wiring or copper..."
Peter posted an answer for this Simpson Washing Machines:
"Sorry not able to read minds or see what is happening from so far away. You need to post a..."
"What about it? So you have a problem that needs sorting or what? We unfortunately are not..."
Peter posted an answer for this Haier Washing Machines:
"There is no magic reset on washing machine. What exactly is the problem? What was..."
Peter posted an answer for this Electrolux Ovens:
"Read the user manual that came with the new oven. If it doesn't say in there that you can..."
Peter posted an answer for this Fisher and Paykel Dishwashers:
"Fisher & Paykel have many different models, not all the same. Some have a bottom seal..."
Peter posted an answer for this Fisher and Paykel Dryers:
"7 Adjust the display to read
correctly on an inverted panel:
?? For DE7060M and..."
"What model number? That will help."
"Usually has a securing ring just under the arm. Turn it quarter turn & arms comes off...."
"Does it drain the water out? It will not move on to next cycle until it has drained fully."
"Nothing to do with the lid switch. Fault code 50 on a F&P is a bad reading on the hot..."
Peter posted an answer for this Maytag Washing Machines:
"If as you put it, the motor smoked significantly then yes the motor is now bad and will..."
"Clutch or gearbox problem. Will have to be pulled apart and inspected to determine what..."
"Not enough details. What is the model number and how did you come up with error code 34...."
"Oil will be coming from the gearbox. Oil seals can be replaced if you can source the seals..."
"Impossible for someone out here in the internet to say why. Needs to be tested and..."
"When was the last time it was serviced? Sounds like a faulty temperature sensor. Get it..."
"What model number? Never heard of a fault code 701. Where does the water come out from on..."
"To change to recirculating mode then the diverter wax solenoid must be getting power fed..."
"Check that the pawl you put on hasn't come off. If ok, turn pulley on bottom of gearbox..."
"No, it is an essential part required to run the motor. Why would you even think about..."
"The MW059 were made from 1999 to 2001. So yes it is getting very old."
"Switch off power & unplug from wall socket. Leave for a few minutes then restart. If..."
Load more activity...
52,383 people helped
View all achievements