Laszlo Kalmar posted an answer for this Metz 45 CL-1 Flash:
"Yes, this is the way the flash can be used with the contemporary digital cameras. The..."
Laszlo Kalmar posted an answer for this Sunpak 622 Super Pro TTL Flash:
"Trigger voltage, what is likely to damage a digital camera when too high, say more than..."
Laszlo Kalmar posted an answer for this Metz 58 AF-1 FLASH f/NIKON TTL Flash:
"Flash bulbs are obsolete parts of the film era. They were last used in the eighties of the..."
Laszlo Kalmar posted an answer for this Sunpak Cameras:
"Sunpak uses different power sources on their high-power handle mount (a.k.a. hammerhead)..."
Laszlo Kalmar posted an answer for this Sunpak Cameras:
"Hi, Sunpak uses different power sources on their high-power handle mount (a.k.a...."
Laszlo Kalmar posted an answer for this Metz 45 CL-1 Flash:
"Yes, you certainly can use the Metz 45CL1 flash with your Nikon D60 - with some..."
Laszlo Kalmar posted an answer for this Sunpak Auto 544 Flash:
"Paramount manufactures every kind of sync cords for virtually any camera and flash:..."
Laszlo Kalmar posted an answer for this Metz Cameras:
"The energy for the very short, very high brightness flash is held in the flash capacitor..."
Laszlo Kalmar posted an answer for this Sekonic L-358 Flash Master Light Meter:
"Most probably the switch under the Mode button went faulty. Try to operate the button many..."
Laszlo Kalmar posted an answer for this Sunpak Auto 544 Flash:
"All photo shops hold "hotshoe to PC" adapters for a few bucks. This solves your problem,..."
Laszlo Kalmar posted an answer for this Pentax K100D Digital Camera:
"Sorry but, most probably, you have to have your camera repaired at a shop. When you turn..."
Laszlo Kalmar posted an answer for this Quantum Cameras:
"Solid arrow -> normal operation. Dashed arrow -> faster cycle, less time to achieve..."
Laszlo Kalmar posted an answer for this Metz 45 CL-1 Flash:
"How do you know you need a "bulb"? (I suppose you call bulb the xenon tube.) The flash..."
Laszlo Kalmar posted an answer for this Pentax K20D Digital Camera:
"The trigger voltage of Metz 45-CT1 Ser No above 534 000 are under7V, that is absolutely..."
Laszlo Kalmar posted an answer for this Metz 60CT-1 Flash:
"This is a so-called computer flash. This means that a built-in sensor measures the..."
Laszlo Kalmar posted an answer for this Metz mecablitz 45 CL-4 TTL Flash:
"During the flash impulse the "photocell", actually a phototransistor, charges a capacitor..."
Laszlo Kalmar posted an answer for this Sunpak Auto 555 TTL Flash:
"Your strobe is faulty and needs repair at a trained service center. The actual culprit may..."
Laszlo Kalmar posted an answer for this Sunpak 622 Super Pro TTL Flash:
"Sunpak does not offer dedicated (TTL) module to any digital cameras. The flash can only be..."
Laszlo Kalmar posted an answer for this Metz 45 CL-1 Flash:
"Have it serviced, or sell it. The culprit of this malfunction is either a faulty quench..."
Laszlo Kalmar posted an answer for this Metz 45 CL-1 Flash:
"No. You can only use the camera in manual mode, setting the shutter speed to, say, 1/125..."
Laszlo Kalmar posted an answer for this Metz 45 CL-1 Flash:
"Originally the 45CT1 had high trigger voltage. In the production period Metz improved it..."
Laszlo Kalmar posted an answer for this Sunpak Auto 544 Flash:
"The Rebel XTi has a sophisticated communication protocol between the camera and a..."
Laszlo Kalmar posted an answer for this Sunpak Auto 544 Flash:
"There can be more than one causes. If intermittent work mean that in, at least, some..."
Laszlo Kalmar posted an answer for this Promaster 7500DX for Canon TTL Flash:
"Try to put some silicone oil to the thread the disc is turning on. The oil slowly..."
Laszlo Kalmar posted an answer for this Sunpak Auto 544 Flash:
"There can be more than one reasons for that. 1. Broken wire at sync terminal. 2...."
Laszlo Kalmar posted an answer for this Sunpak Auto 544 Flash:
"The probable cause of such behavior is a faulty quench capacitor. The part is specially..."