Press enter to search.
If you don't take a swing,you'll never hit a home run.
Jimmy posted an answer for this Washing Machines:
"Hi Arthur, more info would be helpful. Does this happen during the final rinse or during..."
Jimmy posted an answer for this Bosch Washing Machines:
"Hi, I know it's kind of a silly thing but when loading the machine make sure nothing is..."
Jimmy posted an answer for this Kenmore Kitchen Ranges:
"Hey D, f1 can be one of three problems. A stuck key pad,test by pressing all the buttons..."
"Hi Lu, you can disable the Sabbath mode by holding down the bake and broil buttons for 3-5..."
Jimmy posted an answer for this Kitchen Ranges:
"Hi, check to see if the stove comes with a Sabbath mode for the control. Jewish folks will..."
Jimmy posted an answer for this LG Kitchen Ranges:
"Hi, an f11 code means it's taking too long to heat up. Problem is most likely a worn bake..."
Jimmy posted an answer for this GE Microwave Ovens:
"Hi Toan, first question is how old is the microwave? If it is less than 5 years with no..."
Jimmy posted an answer for this Kenmore Washing Machines:
"Hi Betty, f8 e3 error code means the machine is reading a water level that is too high...."
Jimmy posted an answer for this Maytag Washing Machines:
"Hi Andrea, your machine has a bad tub bearing. Considering the age of your machine, you..."
"Hi Lori, you shouldn't have to grease anything on that machine. What is the problem with..."
"Hi Debra, an f11 error code is a disruption of communication between the input control..."
Jimmy posted an answer for this Whirlpool Washing Machines:
"Hi Toni, part kit 285811 will fit your machine. If you only need to replace the worn dogs..."
"Hi Kim, what you need to do is lean the washer back to see where the leak is coming from...."
"Hi Angela, you should contact Whirlpool directly and find out if that is a common..."
Jimmy posted an answer for this Asko Washing Machines:
"Hi Jacqueline,the filter will usually have a rubber o-ring gasket to seal the opening to..."
"Hi Paul, first piece of advice is to make sure the loads of laundry are consistent. A pair..."
Jimmy posted an answer for this Samsung Washing Machines:
"Hi Joyline, definitely run the machine through a cleaning cycle again using a washing..."
"Hi, try using a pair of slip joint pliers. Open them about half way then place one jaws on..."
"Hi Nder, machines that think scare me. Remember what happened in Terminator. They'll try..."
Jimmy posted an answer for this Siemens Washing Machines:
"Hi Cleopatra, e18 error code is a drain problem. Probably a sock or other debris clogging..."
"Hi JR,you have a bad tub bearing. Replacing the tub bearing is a complex job as it..."
"Hi Lola, if you can't find a visible filter access, then you will have to tilt the machine..."
"Hi Petra, if the unit is not filling with water you most likely need a new fill valve. If..."
"Hi Ryan, an E2 error code is a stuck button on the control panel. Try pressing the buttons..."
"Hi, does the door seat fully or is it just not latching when door is fully closed?..."
"Hi Christopher, it sounds like you have a broken motor coupler. It's the part that makes..."
Jimmy posted an answer for this DCS Ovens:
"Hi Lou, sounds like you have a bad igniter. If it's not drawing enough amps it won't open..."
"Hi Steve, from what you're describing,it sounds like you've got a bad door lock motor. It..."
"Hi Geoff, your washer has a bad tub bearing. Depending on the age of the unit and how much..."
Jimmy posted an answer for this LG Washing Machines:
"Hi Santhosh, a PE error code is a water level/pressure switch problem. Could be one of..."
"Hi LakerFan, an LE code is generally a motor overload situation. A large comforter or a..."
Load more activity...
15,980 people helped
View all achievements