2
GZuraski posted an answer for this 1995 Pontiac Firebird:
"Check the ignition wires and distributor cap. The spark is probably jumping to the wrong..."
GZuraski
GZuraski posted an answer for this Ford Cars & Trucks:
"For starters, check tire pressure. Then check for dragging brakes (one wheel might be..."
GZuraski
GZuraski posted an answer for this Televison & Video:
"try the SAP/LANG and MUTE buttons on your remote control."
GZuraski
GZuraski posted an answer for this Sony FD Trinitron WEGA KV-32XBR400 32" TV:
"try the SAP/LANG and MUTE buttons on the remote."
GZuraskiGZuraski posted an answer for this Televison & Video:
"try the SAP/LANG and MUTE buttons on the remote."
GZuraski
GZuraski posted an answer for this Mitsubishi VS-45609 TV:
"Make sure you haven't bumped the MUTE or SAP/LANG buttons on your remote."
GZuraski
GZuraski posted an answer for this RCA F32645 32" TV:
"The sound is probably set to the SAP channel (language) and the SAP channel is not active..."
GZuraskiGZuraski posted an answer for this Televison & Video:
"You need a tuner. For example, you might try a vcr. Most vcr's have a tuner built in,..."
GZuraski
GZuraski posted an answer for this Nintendo Wii Rock Band Guitar for Wii:
"Our guitar keeps loosing the connection"
GZuraskiGZuraski posted an answer for this Nintendo Wii Rock Band Guitar for Wii:
"check the batteries"
GZuraski
GZuraski posted an answer for this Nintendo Rock Band for Wii:
"can not insink guitar or drums"
GZuraskiGZuraski posted an answer for this Nintendo Rock Band for Wii:
"if it is wireless, make sure you plug the little white box into the wii"
GZuraski
GZuraski posted an answer for this Nintendo Animal Crossing: Let's Go To The City with Wii Speak for Wii:
"cant get the pointer (hand) to appear on the screen"
GZuraskiGZuraski posted an answer for this Nintendo Animal Crossing: Let's Go To The City with Wii Speak for Wii:
"Make sure your sensor bar is positioned correctly, within line of sight of the wii remote."
GZuraski
GZuraski posted an answer for this 2002 Chevrolet Impala:
"The clicking noise is probably the starting solenoid. This means you have some battery..."
GZuraski
GZuraski posted an answer for this Troy Bilt 5.5hp Self Propelled Mower:
"Sounds like you have two problems. If the solenoid does not click, either is it not..."
GZuraski
GZuraski posted an answer for this Kenmore 62802 Electric Dryer:
"The heating element might be shorted to ground. This sometimes happens if the vent pipe..."
GZuraski
GZuraski posted an answer for this Dryers:
"Many dryers have two screws near the bottom front. Take out the screws and swing the..."
GZuraski
GZuraski posted an answer for this Sony CDX-GT110 CD Player:
"see the installation manual at http://www.docs.sony.com/release/CDXGT110.pdf"
GZuraski
GZuraski posted an answer for this 1997 Ford Contour:
"Get a set of security bits from Harbor Freight Tools. One of them should fit."
GZuraski
GZuraski posted an answer for this RCA RT2760 System:
"see the manual: http://www.voxxsupport.com/images/manuals/RT2760/media/RT2760_UMEN.pdf"
GZuraski
GZuraski posted an answer for this 2000 Jeep Grand Cherokee:
"if pressure is higher than what it normally is after an oil change, you may have used the..."
GZuraski
GZuraski posted an answer for this Intel Motherboard:
"might be this one: ..."
GZuraski
GZuraski posted an answer for this 1992 Buick Riviera:
"could be a loose connection on one of the battery cables, or the battery might be bad or..."
GZuraski
GZuraski posted an answer for this 2004 Chevrolet Aveo:
"Helm, Inc sells manuals for most cars."
GZuraski
GZuraski posted an answer for this 1999 Toyota Corolla:
"Check for weak spot in tire (move car slowly on level surface, watch for bulges in tire..."
GZuraski
GZuraski posted an answer for this Pioneer DEH-1700 CD Player:
"Installation manual is here: http://www.pioneerelectronics.com/pio/pe/images/portal/cit..."
GZuraski
GZuraski posted an answer for this 1996 Chevrolet C1500:
"check the brake fuse"
GZuraski
GZuraski posted an answer for this Kodak EASYSHARE CD33 & Printer Dock Series 3 (Pack) Digital Camera:
"The problem is most likely a broken plastic lever on the end of the shaft that moves the..."
GZuraski
GZuraski posted an answer for this Kodak EasyShare Printer Dock Series 3:
"The problem is most likely a broken plastic lever on the end of the shaft that moves the..."
GZuraski
GZuraski posted an answer for this Kodak EASYSHARE Plus Series 3 Thermal Photo Printer:
"The print head must be in the up position to remove the cartridge. If you cannot get it..."
GZuraski
Cars & Trucks 9 answers
Televison & Video 6 answers
Video Game Consoles &... 3 answers
Office Equipment &... 3 answers
Cameras 3 answers
Car Audio & Video 2 answers
Dryers 2 answers
Garden 1 answer
Computers & Internet 1 answer
Audio Players & Recorders 1 answer
