2
Parson's Repair Shop posted an answer for this Kenmore Dryers:
"No - the white wire is a neutral for the 120v control circuit, green is the ground -..."
Parson's Repair ShopParson's Repair Shop posted an answer for this GE Dryers:
"The noise was probably a bad support roller - likely cause for it not starting after..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Kenmore Dryers:
"Sounds like a broken belt for the drum - frigidaire #134503600"
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Dewalt Tools & Hardware - Others:
"It needs new blades - likely has a chip in one. See link for replacement tutorial"
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Makita Drills:
"There are no serviceable parts in this charger, it is a replacement item"
Parson's Repair ShopParson's Repair Shop posted an answer for this Dewalt Drills:
"There is a torx headed screw inside the chuck that is reverse thread (Right hand to..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Saws:
"It can be a couple things: 1) Armature is magnetized 2) Soft-start module is bad If you..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Hitachi Saws:
"Check the brush holders and make sure the brush can travel freely all the way down to the..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Jackhammer Hammering:
"Likely it needs new o-rings - there is no compression between the piston and hammer"
Parson's Repair ShopParson's Repair Shop posted an answer for this Rotary Hammering:
"Unfortunately, Kango has been out of business for many years and there are no parts..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Titan 440 Impact Airless Paint Sprayer 440i 805-015:
"You likely cooked the control board, hopefully it didn't damage the motor as well. I..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Air Tools & Compressors:
"This can be caused by a few different things - first, check the date stamped on the bottom..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Air Tools & Compressors:
"Most often it is bad fuel - even if you just bought it, most stores don't rotate their..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Air Tools & Compressors:
"If you are comfortable opening this up, I would check the plug connectors on the ECU -..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Graco Air Tools & Compressors:
"It needs a packing kit. The packings or check balls are leaking by - my recommendation is..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Air Tools & Compressors:
"Most often this is caused by a stuck check ball - turn the pump on, flip the bypass valve..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Senco Air Tools & Compressors:
"Most often it is a jammed nail in the nose or a bent driver blade. If you can push the..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this RTO PasLode 900420 Impulse Framing Nailer :
"You have a stuck head switch - it is part of a circuit assembly (#89), it may be the..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Senco Air Tools & Compressors:
"It most likely needs a firing mechanism - this can only be done at an authorized service..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Air Tools & Compressors:
"My guess is you have an oil-less compressor - most likely it is the piston rings and valve..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Air Tools & Compressors:
"The problem is most likely a bad battery, or bent / bad battery contacts - (depending on..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Titan Impact 1140 High Rider Airless Paint Sprayer:
"Titan Impact doesn't have a reset button - there is a glass, slow-blow fuse on the control..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Dewalt Compact Jigsaw With 3 Adjustments Model Dw317:
"Most likely the culprit is the roller (Bell Crank #623190-00) Unfortunately, the part is..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Dewalt D28770 Hd Deep Cut Variable Speed Band Saw:
"This model had an issue with the long screws that hold the housings together (#3 on the..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Dewalt Saws:
"This model had an issue with the field windings Part#144798-08 - the crimp that connects..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Bosch Saws:
"This model had a few inherent problems: The most common was the rear armature (Part#14)..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Saws:
"SANE AGAIN is correct - a little bit of spark is normal."
Parson's Repair ShopParson's Repair Shop posted an answer for this Hitachi Saws:
"Plug it in, hold the trigger and then bend / wiggle the cord especially close to the tool..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Hitachi Saws:
"Replace the pressure switch #324-998 Part# 224 on breakdown..."
Parson's Repair Shop
Parson's Repair Shop posted an answer for this Dewalt 12" Beveling Sliding Compound Miter Saw Dw718:
"Most of the time with this model and the DW708 this is the front armature bearing - fairly..."
Parson's Repair ShopParson's Repair Shop posted an answer for this Dewalt Drills:
"There is no schematic - the charger is a disposable accessory, no repair parts are..."
Parson's Repair Shop
Air Tools & Compressors 89 answers
Saws 77 answers
Tools & Hardware - Others 53 answers
Drills 49 answers
Hammering 9 answers
Dryers 4 answers
Televison & Video 1 answer
