Just be me
Eureatha Fugghett posted an answer for this Sewing Machines:
"make sure the zigzag setting is on zero and the stitch length is on at least three to four..."
Eureatha Fugghett posted an answer for this Sewing Machines:
"Hold the latch on the bobbin case and make sure it is pressed all the way in before..."
Eureatha Fugghett posted an answer for this Sewing Machines:
"Are you pulling the thread into the bobbin case slot?"
Eureatha Fugghett posted an answer for this Sewing Machines:
"Feed dog may be to low"
Eureatha Fugghett posted an answer for this Sewing Machines:
"Check your manual, some sewing machines do not require oil in certain places. If you don't..."
Eureatha Fugghett posted an answer for this Janome Sewing Machines:
"switch the direction the thread comes off the spool so that it pulls from the front of the..."
Eureatha Fugghett posted an answer for this Sewing Machines:
"adjust tension on bobbin case"
Eureatha Fugghett posted an answer for this Singer Sewing Machine 7422:
"look for lever to adjust feed dog next to bobbin case on the bottom front of sewing..."
Eureatha Fugghett posted an answer for this Sewing Machines:
"Clean tension with a small brush or you need a new tension spring"
Eureatha Fugghett posted a question about Singer Inspiration 4210 Mechanical Sewing Machine:
"needle hits the bottom of the bobbin plate"