2Dr Tension
Wayne Buss posted an answer for this Bernina Sewing Machines:
"Not a problem you should attempt take it to an authorized dealer/technician"
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Check the hook/shuttle to see if it is damaged or check the race, the metal track that..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Decorative quilt designs such as lines, feathers, circles etc. are created using a..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Can you describe problem [email protected]"
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"You will have to remove or tip back the lid to get at the bobbin winder, then use a..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Bernina is unique and uses only Bernina feet with the exception of an adapter foot and..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Above the Zig Zag dial there are small lights on either side there are two vertical..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Requires calibration by a qualified technician sometimes the buttonhole foot is faulty,..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"The contacts in the foot control are likely broken a qualified Bernina Technician should..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Are you using the correct bobbins? Is the bobbin nearly empty, sometimes the sensor goes..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Without taking off the covers, Pretty much only the shuttle"
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"What model? 217? 117? 950?"
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Is your needle in backward, are you using correct needles, if so shut off machine,..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Replace the needle threader itself, there is no good or easy way to straighten the..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Likely the foot control was dropped and the contact points are damaged. It is tricky to..."
Wayne BussWayne Buss posted an answer for this Baby Lock Sewing Machines:
"Have you tried to use the wire looper threaded to get the thread through the looper? I..."
Wayne BussWayne Buss posted an answer for this Baby Lock Sewing Machines:
"Be sure you are using a standard needle and that you are inserting them in all the way..."
Wayne BussWayne Buss posted an answer for this Baby Lock Ellure:
"Definitely a problem to be adjusted by a qualified Babylock technician"
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Until the foot control overheats. Be sure you are running the machine at full speed when..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Likely the shuttle is damaged, check to see if any nicks on the shuttle if so polish them..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Be sure there is no damage to the shuttle/hook that series used a fibre (composite inner..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"The needles can be replaced but need to be secured by riveting and or epoxy glue. Most..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Likely the threads are stripped on the screw of the hoop you should replace the long..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"There is a small black plastic finger that engages the needle bar and if it gets stuck..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Be sure you do not have a bent needle and or a damaged shuttle, if the latter, one should..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Try using a Metallica or top stitching needle also check that the needle is inserted all..."
Wayne BussWayne Buss posted an answer for this Bernina 1008:
"Sometimes the foot control switching unit is faulty. Is it an electronic foot control? ..."
Wayne BussWayne Buss posted an answer for this Bernina Virtuosa 150:
"Never been serviced? Whoops, as an old tech, I'm not surprised, how often do you oil your..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Can I assume you mean the foot control does not work or do you mean the machine will not..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"Is the bobbin winder engaged? Likely this is the problem if not contact me wayne..."
Wayne BussWayne Buss posted an answer for this Bernina Sewing Machines:
"You can tell a Bernina bobbin by the number of holes "7" 9mm diameter and 6mm width the..."
Wayne Buss
Sewing Machines 120 answers
