Work, Don't Play
cgregory369 posted an answer for this Metabo Saws:
"this means the grinder is being over worked and is in the overheat protection mode. when..."
cgregory369 posted an answer for this Metabo 01451 We14 150 Quick Electronic 6 Inch Angle Grinder:
"the red LED light on that grinder only does 2 things. if the light is solid red it means..."
cgregory369 posted an answer for this Metabo W14 150 ErgoD Angle Grinder:
"you may want to verify the model you have. in the question it says W14 150 Ergo. this..."
cgregory369 posted an answer for this Metabo W14 125 Ergo Angle Grinder 5":
"You should NEVER put a larger disk on a grinder then what its rated for. Aside from the..."
cgregory369 posted an answer for this Rotary Hammer Drill Metabo Uhe 28 Multi W/2 Chucks:
"The Metabo UHE28 has the Metabo Electronics. The electronics in the tool is designed to..."
cgregory369 posted an answer for this Metabo Drills:
"First you will need to remove the "Set Screw" in the middle of the chuck. this screw is..."
cgregory369 posted an answer for this Metabo Drills:
"Did you check the carbon brushes?"
cgregory369 posted an answer for this Metabo SBE1010PlusC 1/2" 0 900/0 2,600 Rpm 8.0 Amp Impact Drill W/Case:
"Did you take a look at the carbon brushes?. Metabo has what they call Auto stop Carbon..."
cgregory369 posted an answer for this Metabo Drills:
"Service Centers are listed on the Metabo Web Site. go to Metabo.US, then..."
cgregory369 posted an answer for this Metabo BSP15.6PLUS 15.6 Volt Cordless Drill / Screwdriver BSP15.6 Plus:
"Very rarely will you come across 2 bad batteries in a kit. If you have 2 batteries that..."
cgregory369 posted an answer for this Metabo BSP15.6PLUS 15.6 Volt Cordless Drill / Screwdriver BSP15.6 Plus:
"impulse will aslo really help when trying to remove old stripped screws. it will actually..."
cgregory369 posted an answer for this Metabo 685009520 COMBO 4.1 18V Cordless Lithium-Ion 4-Piece Combo Kit:
"The "memory" effect really only effects nicad and nimh batteries. Lithium is not really..."
cgregory369 posted an answer for this Metabo SR20 23 1/3 Sheet Orbital Finishing Sander:
"The standered screws in the sander are Torx. You will need a torx 15 or 20 (cant remember..."
cgregory369 posted an answer for this Metabo 600242420 BHE22 7/8" SDS-plus Rotary Hammer:
"I know this may sound pretty trivial but, have you tride checking/changing the power cord...."