3If you don't ask you don't get
Barry Coates posted an answer for this Ovens:
"Generally speaking, if the oven door closes most of the way, but remains partially open,..."
Barry CoatesBarry Coates posted an answer for this Stoves Ovens:
"Remove rust with sandpaper, or wet and dry paper. Then touch up with with the appropriate..."
Barry CoatesBarry Coates posted an answer for this Fagor Ovens:
"Sounds like the thermostat control is faulty, the usual solution is to replace oven..."
Barry CoatesBarry Coates posted an answer for this Whirlpool Ovens:
"You have not got the hinges located properly, this is the only possible explanation."
Barry CoatesBarry Coates posted an answer for this Belling Ovens:
"If 2 rings are not working, then it is probably the rings that are faulty It means testing..."
Barry CoatesBarry Coates posted an answer for this Belling Ovens:
"THE only solution is to replace the regulators that control the hotplates. Could prove to..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"Normally, when you have the grill on, it is usual for the cooli9ng fan to come on, so I do..."
Barry Coates
Barry Coates posted an answer for this Washing Machines:
"Main bearings have failed on drum, waste of time fitting a new seal until bearings..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"The oven thermostat is faulty, and needs to be replaced."
Barry CoatesBarry Coates posted an answer for this Ovens:
"It will not be the grill that is noisy, but more than likely the top oven cooling fan..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"If the oven heater indicator lamp is on, then the fan oven element is faulty, and needs..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"Probably a faulty heater element. You need to disconnect each element in turn, and replace..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"Hi. The only permanent solution is replace the complete fan motor. The problem is the..."
Barry Coates
Barry Coates posted an answer for this Hotpoint Ultima WF860 Front Load Washer:
"You need to replace the heater element located at the bottom rear of drum. Remove lower..."
Barry Coates
Barry Coates posted a question about Heating & Cooling:
"wires pulled of capacitor, need to know which wires got to which terminals"
Barry Coates
Barry Coates posted an answer for this AEG U3100-4 Electric Double Oven:
"I have an AEG Competence Single oven model B2100-1-w The oven is not reaching or holding..."
Barry CoatesBarry Coates posted an answer for this AEG U3100-4 Electric Double Oven:
"You need to replace the fan motor assy."
Barry Coates
Barry Coates posted an answer for this AEG D2100-4 Electric Double Oven:
"i have an aeg d2100-4-m oven. main lower oven not getting hot. Have replaced element, to..."
Barry CoatesBarry Coates posted an answer for this AEG D2100-4 Electric Double Oven:
"Hi .Sounds like the oven thermostat is faulty.,This gives a supply to the element .The..."
Barry Coates
Barry Coates posted an answer for this New World 90TC Electric Double Oven:
"Hi. Sounds to me like the symbol represents a thermometer, which is for the main oven..."
Barry CoatesBarry Coates posted an answer for this New World 90TC Electric Double Oven:
"On the NW90 double oven. What does the symbol on the main oven function stand for. It..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"If you can see the element heating up, but the fan is not working, then you need to..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"The oven heating element seems to be working but the fan is not working. It appears that..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"I have a neff fan built in oven everything is working except the fan is it a matter of..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"Make sure there is a supply to the fan before attempting to replace it, if there is and..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"hotpoint bd32 oven and top oven/grill what output does this have .and does it need 6mm..."
Barry CoatesBarry Coates posted an answer for this Ovens:
"Hi. You most definitely need a 6mm hard wired supply cable to cooker, anything less, and..."
Barry CoatesBarry Coates posted an answer for this Washing Machines:
"It will heat the water as normal, even though it is a cold fill only washer. Just select..."
Barry CoatesBarry Coates posted an answer for this Washing Machines:
"Samsung WA80v3 connected to cold water supply. Does it heat water during wash cycle or..."
Barry CoatesBarry Coates posted an answer for this Creda Washing Machines:
"I bought a creda washing mashine sencond hand with no handbook can I get one for my..."
Barry CoatesBarry Coates posted an answer for this Creda Washing Machines:
"Depends on the model number Try the following site. WWW.HOTPOINTSERVICE.CO.UK In the menu..."
Barry Coates
Washing Machines 2073 answers
Ovens 1064 answers Dryers 286 answers
Kitchen Ranges 10 answers
Refrigerators 9 answers Freezers 6 answers
Computers & Internet 2 answers
Irons 1 answer
Vacuums 1 answer Dishwashers 1 answer
Toshiba Satellite Pro L300...