do it yourself and save a fortune
ken dourof posted an answer for this Sewing Machines:
"You need to give more specific information"
ken dourof posted an answer for this Sewing Machines:
"If the machine is not zig zagging when you select zig zag it will mean the selector finger..."
ken dourof posted an answer for this Sewing Machines:
"If the needle is moving side to side the chances are it is a blunt or bent needle, failing..."
ken dourof posted an answer for this Sewing Machines:
"The chances are you only have thread stuck in the raceway, take it out and have a good..."
ken dourof posted an answer for this Singer 7462 Mechanical Sewing Machine:
"Need more information"
Anonymous posted an answer for this Sewing Machines:
"I have bought a Singer 513 sewing machine. It hasn't been used for over 10 years but..."
ken dourof posted an answer for this Sewing Machines:
"I have bought a Singer 513 sewing machine. It hasn't been used for over 10 years but..."
ken dourof posted an answer for this Sewing Machines:
"You need to undo the foot control and take out the little square supressor and discard it"
ken dourof posted an answer for this Juki TL-98Q:
"My Juki TL-98Q won't turn on. No hummm, nothing. I've checked all connections and..."
ken dourof posted an answer for this Juki TL-98Q:
"If the light is on but no noise at all when you press on the control it must be a break in..."
ken dourof posted an answer for this Sewing Machines:
"I need a manual for a free westinghouse sewing machine"
ken dourof posted an answer for this Sewing Machines:
"Try www.sewing-machine-machine-manuals.com and click on relics and don't be put off by..."
ken dourof posted an answer for this Sewing Machines:
"i have a tread wrapped around inside the threading mechanism. I need to see a diagram to..."
ken dourof posted an answer for this Sewing Machines:
"Chances are it is wrapped around the raceway area, take out the bobbin case and take out..."
ken dourof posted an answer for this Husqvarna Viking 1:
"Undo the foot control and take out the little square suppressor that will cure the problem"
ken dourof posted an answer for this Husqvarna Viking 1:
"My sewing maching runs by itself. It is an older Viking from the early 70's."
ken dourof posted an answer for this Kenmore Sewing Machines:
"Probably thread jammed in the raceway area, take the raceway out and check"
ken dourof posted an answer for this Kenmore Sewing Machines:
"Needle not dropping to fabric. Wheel will not turn to get it there."
ken dourof posted an answer for this PfaFF Sewing Machines:
"Try [email protected]"
ken dourof posted an answer for this PfaFF Sewing Machines:
"How can I find a manual for a pfaff 134 sewing machine?"
ken dourof posted an answer for this White Sewing 1866 Mechanical Sewing Machine:
"Try www.sewing-machine-manuals.com and click on relics and don't be put off by the..."
ken dourof posted an answer for this White Sewing 1866 Mechanical Sewing Machine:
"want to find a manual for a Morse 6500 sewing machine"
ken dourof posted an answer for this Bernina BERNETTE 65 Mechanical Sewing Machine:
"My Bernette 65 sewing machine isn't pulling my main thread through. Bobbin tread is..."
ken dourof posted an answer for this Bernina BERNETTE 65 Mechanical Sewing Machine:
"Make sure you have a new needle in first and the correct way round, failing that the..."
ken dourof posted an answer for this Singer Sewing Machines:
"Is the balance wheel turning when you press on the foot control? if it is then the stop..."
ken dourof posted an answer for this Singer Sewing Machines:
"I have a singer sewing machine model #7422. The foot pedal runs but it is not connecting..."
ken dourof posted an answer for this Sewing Machines:
"Check the pressure on the foot, if you sew on fine or silky fabric that will also be a..."
ken dourof posted an answer for this Sewing Machines:
"the stitches on the bernina 1030 is very close together and small although the setting is..."
ken dourof posted an answer for this Sewing Machines:
"need brother manuel for cs6001"
ken dourof posted an answer for this Sewing Machines:
"Try [email protected]"
ken dourof posted an answer for this Sewing Machines:
"I have a new machine, using for the second time. After filling bobbin, handwheel became..."