Zyxel Computers & Internet - Popular Questions, Answers, Tips & Manuals
I have a router Zywall
use the same subnet mask
255.255.255.0 - is common class of ip
192.168.0.1 - router
192.168.0.2 - 192.168.0.19 assign for printers and routers
192.168.0.20 - 192.168.0.254 assign to computers
My parents have a Zyxel router for their WiFi. The password was changed a while ago but they don't have a record of it. How can we find it?
If the modem your talking about is the ZyXEL Prestige 623R-T1 ( that i believe is supplied with iol ), follow the reset sequence below !
10. How to use the Reset button?
Step 1:
--------
Make sure the PWR led is on(not blinking)when you begin this procedure.
Press the RESET button for ten seconds (or until the SYS LED starts blinking), then release it. If the SYS LED blinks, the defaults have been restored and Prestige restart.
Otherwise, go to step 2.
Step 2:
-------
Turn the P623R-A1 off.
While pressing the RESET button, turn the Prestige on.
Continue to hold the RESET button.
The PWR LED will begin to blink and flicker very quickly after about 10 seconds.
This indicates that the defaults have been restored and the P623R-A1 is now restarting.
Playing games vis LAN
For LAN play, you don't need to open any ports. However to forward ports you need to go to the routers control panel. Type the default gateway IP Address for your router in the address bar of your browser. If you don't know this, it can be found by opening the command prompt and typing "ip config". scroll down until you find Default Gateway and type the number (It will look like 192.168.1.1 or very similar) Type that into the browser and it will ask you to log in. If you didnt set up the administrator login, just use the default password 1234. From there you should be able to find the port fowarding section, once you do just enter the range of ports you want to foward.
I have connection between my
dchp problem. sounds like the modem is doing dhcp that's why it works plug in directly. disable the dhcp server in the router go to Network > DHCP Server > General in the router and disable it. only the modem or router can do dhcp.
I have just installed a
I assumed you've restarted the router. I only ask as I often have issues like that where some units can see the internet and some can't when freshly connected. The other thing is to check that the adaptor settings for the network card under ipv4 dont have any manual DNS settings and is set to auto unless you are using a public DNS such as Google and then the override settings such as 8.8.8.8 and 8.8.4.4 would be fine.
I have zyxel p-600 series router and i managed to
when going wifi
you have to go to internet connections or options in the control panel and click on the LAN settings button
the wifi modem will have a security code on the back and the wifi connection area code
click on the found area code on the back of the modem then enter the security code
Not finding what you are looking for?