ZTE Lands Phones - Page 3 - Recent Questions, Troubleshooting & Support

Programming a Panasonic KX-T7730 phone to share the same line with a cordless phone using a splitter requires specific steps to ensure proper operation. Keep in mind that splitting a phone line may affect the overall call quality and performance, so it's important to follow the instructions carefully. Here's a general guide to help you set it up:

1. Obtain the Necessary Equipment:
   • Panasonic KX-T7730 phone
   • Cordless phone (compatible with the line splitter)
   • Telephone line splitter (designed to split the line to multiple devices)
2. Connect the Splitter:
   • Plug one end of the telephone line from the wall jack into the "Line" or "Input" port on the splitter.
   • Plug the other end of the splitter into the "Line" or "Input" port on the KX-T7730 phone.
   • Plug the cordless phone's base unit into the "Phone" or "Output" port on the splitter.
3. Configure the KX-T7730:
   • Lift the handset of the KX-T7730 phone.
   • Press the "Program" button, followed by the desired extension number (e.g., "101") or the "Intercom" button.
4. Select the Line:
   • Press the "0" or "CO" button on the KX-T7730 phone's keypad to select an available outside line (usually labeled as "CO" lines).
5. Make a Test Call:
   • Place a test call from the cordless phone to ensure that both devices are functioning as expected. Verify that you can make and receive calls from both phones.
6. Adjust Settings (if needed):
   • Depending on your specific requirements and the features of your phone system, you may need to adjust settings such as ringing patterns, call forwarding, and call waiting. Refer to the user manual for your KX-T7730 phone for instructions on adjusting these settings.
7. Testing and Troubleshooting:
   • Test the setup thoroughly by making and receiving calls from both the KX-T7730 phone and the cordless phone.
   • If you encounter any issues with call quality, dropped calls, or interference, consider consulting a professional technician or your phone service provider for assistance.

Impossible to answer with so little information. All questions on Fixya need 'make model (what it is)' as the first 3 words. You posted to Lands Phones, but is is? click here https://www.google.com/search?q=land+phone+reset+voice+mail+and+name Click comment under my post if you want further help. ..

The way you have written this, it sounds like you are expecting it to do something it isn't meant to do. You stated "but it doesn't come to my messages". Are you expecting the messages to be forwarded to say a cellphone? You set the Answerphpne to answer and a light should be lit. When you get a call and a message the light flashes. You press a button and you listen to it. Your manual. It appears to be Australian, we are in North America. https://www.telstra.com.au/content/dam/tcom/personal/support/pdf/home-phone/Telstra-Call-Gaurdian-301-cordless-phone-with-answering-machine.pdf ..

Ringer is switched off. Pages 6 and 13 of the manual refers

vista-390-user-manual.pdf

SaskTel https://www.sasktel.com > attachments > support PDF Use this user guide to learn more about the Model 390's features. Emergency Service Feature. The Model 390 will provide telephone service during a power failure ... 18 pages

If the message light on the Telstra cordless handset 1 is flashing, indicating a new message, but the message light on handset 2 does not flash even when it's on the cradle, there are a few troubleshooting steps you can try:

1. Check message notification settings: Make sure that the message notification settings on both handsets are properly configured. Refer to the user manual or the settings menu on the handsets to adjust the message notification settings. Ensure that the notification is enabled for both handsets.
2. Reset the handsets: Try resetting both handsets to their default settings. This can be done by removing the batteries from the handsets, unplugging the base station, and leaving them disconnected for a few minutes. Then, reinsert the batteries and plug in the base station. Allow the handsets to reconnect to the base and check if the message light on both handsets functions properly.
3. Check the base station: Ensure that the base station is functioning correctly. Check if the base station is properly connected to the telephone line and power source. If possible, try connecting handset 2 to the base station that handset 1 is connected to and see if the message light functions on that base station. This will help determine if the issue is with the base station or the handset itself.
4. Contact Telstra support: If the issue persists after trying the above steps, it may be best to contact Telstra support directly for further assistance. They will have specific knowledge of their product and can provide more detailed troubleshooting steps or advise on any potential repairs or replacements that may be necessary.

Remember to refer to the user manual for your specific Telstra cordless model for more detailed instructions on troubleshooting and operating the handset.

Turn Ringer Volume to Off. https://docs.rs-online.com/2d2d/0900766b80176e9c.pdf ..

Leonard What you are doing here doesn't work. Please don't make follow-ups as a new post. It doesn't work because this post and the last one has no context to your very first question which I answered. Your last answer and this one should be underneath my answer by clicking Comment UNDER my answer. I only saw your two new posts purely be accident. If you do it the right way, I will get a notification that you have replied and may need further help. Your posting history. https://www.fixya.com/users/leonard-hedgecock My first answer to you shows all the parts suppliers and will centre to where you live, as that is the way Google Search works. ..

If the busy lines on your Panasonic KX-DT333 switchboard/directory are not lighting up in red after re-programming the phones, it's possible that the programming settings related to the busy line indication were inadvertently modified. Here are a few steps you can try to bring back the feature:

1. Verify quick dial settings: Double-check the quick dial settings on the phones that are not displaying the busy lines. Make sure that the busy line appearance is correctly assigned to the corresponding quick dial buttons. You can refer to the phone's user manual or programming guide for instructions on how to assign busy line appearances.
2. Check programming options: Access the programming mode of your Panasonic KX-DT333 system. Look for settings related to busy line indication or busy lamp fields (BLF). Ensure that the appropriate options are enabled or configured to display the busy lines as red.
3. Restart or reset the system: Try restarting the switchboard or resetting it to its factory default settings. This can help restore any configuration settings that might have been changed during the re-programming process. Be aware that resetting the system will erase all previous programming, so it's crucial to have a backup of your settings if necessary.
4. Consult the user manual or contact support: If you're still experiencing difficulties, refer to the user manual or programming guide for your Panasonic KX-DT333 system. These resources should provide detailed instructions on how to configure the busy line indication feature. If needed, you can also reach out to Panasonic customer support for further assistance.

Remember to exercise caution when accessing the programming mode or making changes to your system's settings. If you're unsure about any steps or if you're uncomfortable with the process, it's advisable to consult a professional technician or contact Panasonic support for guidance.

Question edited for clarity, 'voice mail' in full (vmail and VM). Reading the Manual is a good place to start. :>D Page 41 of the manual refers. https://panasonic.ca/viewing/ALL/KX-TG6531C/OI/TG6531C_PNQX2398ZA/TG6531C_PNQX2398ZA.pdf ..

Number one is normally permanently locked to your answer machine. Most phone manufacturers use this as a standard layout so you will not be able to reprogram it to a different number.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiw_ry98vL-AhUTOH0KHX0VBmEQFnoECBYQAQ&url=https%3A%2F%2Fservice.gigaset.com%2Fen%2Fsupport%2Fsolutions%2Farticles%2F75000057196-reset-gigaset-phones-to-factory-settings-perform-basic-reset&usg=AOvVaw3whmznDEpjPDEBy7I2hxF2

Is there a question? You want to know how to Register every system phone or every system phone handset for every home phone ever made? Google make model (phone) / (phone handset) will not register Normally it is because there is the maximum number of phones on the system, or a phone has been removed. You have to use the old phone to deregister it on the system before adding a new one.

There isn't one. I suspect that model number may be incorrect. https://www.google.com/search?q=beetel+%22CB48001%22+manual There are manuals in this link https://www.google.com/search?q=beetel+phone+manual ..

As of now, there is no way of getting personal details of any mobile users for the general public. It is only accessible for the police and other security agencies through the cyber cell. If you want to know about the number too badly, consider filing a case under cyber laws.


Hope this one solved your problem. If you have additional doubts, please come back to us.


Regards
Sunny.


P.S: If the solution is helpful, please accept the solution.

Retrieving phone numbers on incoming calls is easy! All you need to do is enable caller ID on your phone. This will allow you to see the phone number of the person calling you. Once you have caller ID enabled, you can easily keep track of who is calling you and when. Plus, you can even add the numbers to your contacts list for easy access in the future.

https://www.ebay.co.uk/itm/155509200852?hash=item24351217d4:g:MsUAAOSw8LxkM~fL

This doesn't appear to be a North American model. This link might work better for you than it does for me. Normally all Panasonic KX- manuals are online. https://www.google.com/search?q=kx-tsc28cid+manual ..

https://support.itel.com/hc/en-us/articles/202724885-Restore-an-Aastra-Phone-to-Factory-Defaults

The E02 error code on a Russell Hobbs 24320 coffee maker typically indicates an issue with the heating element or temperature sensor. Here are a few things you can try to troubleshoot the problem:

1. Make sure the coffee maker is properly plugged in and turned on.
2. Check the water reservoir and ensure it is filled to the correct level.
3. Clean the machine thoroughly, including the water tank, filter basket, and carafe.
4. Check the heating element and temperature sensor for any signs of damage or corrosion. If you notice any issues, you may need to replace these parts.
5. Try resetting the coffee maker by unplugging it for a few minutes and then plugging it back in.

If none of these steps work, you may need to contact Russell Hobbs customer service for further assistance or to arrange for repairs.