ZT Group Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 22 Products
  • 257 Answers

Somewhere on the computer is the access code to re-install and activate XP from Microsoft, if it was still available. But it's not. Do you really want to buy XP again? Or pay for newer software on an 11 y/o PC? Recommend you put that money into upgrade. New or used.

ZT Group Cisnet ... | Answered on Feb 06, 2018

To reset Internet Explorer settings
  1. Close any Internet Explorer or Windows Explorer windows that are currently open.

  2. ?id=microsoft.windows.resources.shellexecutetopiciconClick to open Internet Explorer.

  3. Click the Tools button, and then click Internet Options.

  4. Click the Advanced tab, and then click Reset.

  5. Select the Delete personal settings check box if you would like to remove browsing history, search providers, Accelerators, home pages, and InPrivate Filtering data.

  6. In the Reset Internet Explorer Settings dialog box, click Reset.

  7. When Internet Explorer finishes restoring the settings, click Close, and then click OK.

  8. Close Internet Explorer.

    Your changes will take effect the next time you open Internet Explorer.

  • If you close all visible windows, but still get an error message when trying to reset, you might have programs running that are not visible. Restart Windows, open Internet Explorer, and try resetting again.

  • To back up your home page or home page set before resetting Internet Explorer defaults, see Back up your home page or home page tabs.

  • If any of the categories fail to reset, it is because Internet Explorer could not access a file or registry setting. This can be caused by insufficient security privileges, files or settings being used by another program, or low memory or high CPU usage. You can either continue to use Internet Explorer without restoring these settings, or restart your computer and try to reset again.

  • If you are using Internet Explorer on a server and have turned off Enhanced Security Configuration or hardening (stronger security settings for use on servers), reset will go to client-level security. You must reinstall hardening if you want the increased security level. For more information on Enhanced Security Configuration, see Enhanced Security Configuration for Internet Explorer online.

  • To re-enable add-ons, see Internet Explorer add-ons: frequently asked questions.

ZT Group CISNET... | Answered on Dec 05, 2017

There are about three things that might have happened. They're all mentioned at the following link:

Any Windows CD of the exact same Windows version can be used if you decide to try that route. You're really just looking to repair Boot.ini or hal.dll

ZT Group Cisnet ... | Answered on Oct 02, 2017

Well, i was in the same Bulk SMS software searching spree a week before. I got some solutions thoug, with some cons. I could send only 160 characters of messages. I could NOT send with my company name, (I guess we got to get approval from specific service provider for this. am not sure though)..The software name is "SMSgee PC Bulk SMS software version 1.7"

You can download this version from the net. And get it working all your life.

ZT Group Cisnet... | Answered on Nov 07, 2015

its best to take out lower ram and replace with 1gb ram,and always buy in pairs.

ZT Group Cisnet ... | Answered on Mar 30, 2015

  1. Open the Google Play Store app cc10da51cb495de8c4bf040090171c92f1ac.
  2. Touch the Menu icon 966cae213cc274b018d091792568ff148021 > Settings > Content filtering.
  3. Choose your filters > OK.
    • After changing your settings, you'll be asked to create and enter a PIN to help prevent unwanted changes to your filter settings.
You will need to know the PIN number to remove the filtering.

see this web page

Restrict app downloads

ZT Group... | Answered on Feb 26, 2015

plug a device into it and see, eg a flash memory stick. If it doesn't work try different usb socket
ps there be a number of reasons why your usb port doesn't seem to be working If it doesn't. Some are software related

ZT Group Cisnet ... | Answered on Dec 22, 2014

Several ways of doing this. As far a software goes install Glary utilities. your can have it installed for you for FREE by going to www.ninite.com

then checking Glary and then clicking on Get Installer. Once it downloads the installer just click on it and it will install Glary Utilities on your computer. Not only does it clean, it defrags your hard and defrags your REGISTRY.

ZT Group Cisnet... | Answered on Dec 04, 2014

I had the same problem didn't have a restore disk but you should have one that came with the system I restore mind with out the disk --( just type this in) how to restore pc are laptop to factory setting page will open follow instruction and once done you will be good to go let me no how you came out good luck

ZT Group... | Answered on Sep 23, 2014

CMOS settings could be set at fault so go check bios settings by tapping f8 or del or F2 .choose either cd or hd 0 as first start up or reset to default then press f10 to save and restart.if it still causes problems it could be boot sector of hard drive or a loose cable .its down to some detective work.if it's not a hardware issue I.e. Corrupt bad sectored drive , faulty cables ...then it has to be software issues.
Sometimes if you leave memory card in a slot or you may have left a disc in one of your drives.this can sometimes be the cause
if none of the above then something is corrupting startup which means boot sector root kit problems

ZT Group Cisnet... | Answered on Sep 06, 2014

The following lines in your USB controller discriptions, means that you have
ISB 2.0:

"Intel(R) 8280 1DB/DBM USB 2.0 Enhanced Host Controller - 24CD"


Click on Link to Add MS to your News Reader: news://msnews.microsoft.com

Basically its already usb 2.0 and you don't need to upgrade it anymore

Hope I was able to help you thanks

ZT Group Cisnet ... | Answered on Jul 29, 2014

It could be a defective or dirty video card. But in the some cases, where built-in graphics is used (no video card, built-in to motherboard) it is the memory (RAM) that is causing the problem.

Try removing your video card (if you have any) or memory from the board.

Video card removal instructions: http://bit.ly/1m0jwb3
Memory removal instructions: http://bit.ly/1s5svYr

Clean the pins (gold contacts) with a rubber pencil eraser. Install the memory or the video card back to the board & power-on. If this doesn't work, replace the defective unit.

You may also try cleaning the internals of the computer using a non-static brush & a can of compressed air.

ZT Group Cisnet ... | Answered on May 08, 2014

Yes, there is. You can find information about it here:
If you want real help, know your motherboard's brand & model so we could check what type of RAM it supports. If you can't find out, download and install speccy or aida64. It could give detailed report about the specs of your pc.
Hope this helps.

ZT Group Cisnet ... | Answered on Apr 26, 2014

Nvidia have 3d campatible ones, also if you cant use your screen saver that most likely means you cant use windows aero, so you might just need the graphics driver.

ZT Group Cisnet ... | Answered on Apr 18, 2014

when the computer boots up use either F2 , F4 , F6, or F8 sometimes you need to press both F4 and F6 together and once in the boot menu enable the options under boot menu and restart the pc

ZT Group Cisnet ... | Answered on Feb 18, 2014

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top ZT Group Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers


Level 3 Expert

13434 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a ZT Group Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides