Zongshen Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 7 Products
  • 80 Answers

Hi, Lee for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
110cc ATV Help Trouble Starting the Engine
Zongshen Motorcycle repair manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Zongshen... | Answered on Jan 28, 2017

Go online for the nearest dealer and see what he's got. These are cheap imports with very little support so you could have trouble.

Zongshen... | Answered on Nov 17, 2016

You can buy this

http://www.haynes.com/autorepairmanuals/zongshen/zs125gy-a Haynes Zongshen ZS125GY Repair Manuals

and/or check the local library for one and also, contact Zongshen via email:
[email protected]

I just did for you in fact.


you can also join and post ina forum or some user group like:

Zongshen... | Answered on Jun 04, 2016

Hola Berto , y los sospechosos habituales son: 1. La velocidad de ralent? mal ajustada . 2. Entrada de fuga de aire del sistema. 3. da?ado o restringido de combustible sistema de ventilaci?n del tanque. 4. filtro de aire sucio o da?ado. 5. Acelerador de la bomba fuera de servicio. 6. Vac?o mal funcionamiento conjunto de pist?n . 7. v?lvula Enrichner no sentado o con fugas . 8. restringido las v?as de suministro de combustible . 9. Plugged respiradero taz?n. 10. combustible y aire chorros o pasajes sueltos o tapados . 11. Nivel de combustible incorrecto . 12. desgastadas o aguja o chorro de aguja da?ada . 13. chorros o pasajes principales sueltos o tapados . Para obtener m?s informaci?n acerca de su problema por favor visite los sitios web a continuaci?n. Buena suerte y que tengas un buen d?a .

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2006 Zongshen GS... | Answered on Sep 30, 2015

Hi Mgandy1, for more information about your question please visit the website below. Good luck and have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2008 Zongshen... | Answered on Sep 27, 2015

if you have the gasket set just match up the gaskets you take off if your set has one too many it could be for different model but same engine with higher or lower performance.

2005 Zongshen... | Answered on Feb 07, 2015

if you have replaced all that it sounds like it is the stator. its an alternator for small engines. get one on ebay cause factory are always expensive. its located behind the pull start. take that off then the side case cover.

Zongshen 985 C3... | Answered on Jul 22, 2014

Maybe Zongshen can supply a manual.

2008 Zongshen... | Answered on Apr 29, 2014

Alot of times if you look and the base of the cylinder there will be a Cm #. That number is the cc's of the bike. for example if it says cm250. Then it's a 250. and so forth.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

Zongshen... | Answered on Dec 09, 2013

bad earth connection on engine to frame

2008 Zongshen... | Answered on Nov 13, 2013


Zongshen... | Answered on Sep 26, 2012

Please check on the timing. It is possible that the timing is off of sync and so this results in backfiring . Mostly it can be advanced and the firing takes place when the throttle is cut . Also check if there is fuel overflow as it can result in pile up in the exhaust and cause this firing.

2006 Zongshen GS... | Answered on Oct 01, 2011

Check your wiring , there must be some wire drainig all the juice from the batteries.
Good luck

2006 Zongshen GS... | Answered on Sep 18, 2011

That's right! you have to try another brand with similar cable, the difference is the length of the cable and the end notch.
Try and try until you succeed.
Thanks for asking FixYa!

2006 Zongshen... | Answered on Aug 15, 2011

The battery is under the seat and seat has to be removed.On the side of the seat in the inner side there are hidden bolts.that are to be removed , to loosed the seat. ---------- Click this link below to get more details:--- http://howtobyme.blogspot.com/2011/07/how-to-remove-seat-on-2006-zongshen.html ------------- This should help.Thanks.Helpmech.

2006 Zongshen... | Answered on Jul 16, 2011

set the gap at 20 thousants it should run perfect....

Zongshen Hoss... | Answered on Jul 15, 2011

Hi, I hate to say this. Go buy a new switch. It will be harder to rewire than to replace the switch.
Good luck. They're not too expensive.

Zongshen 985 C3... | Answered on Jun 15, 2011

not sure what it is that you need help with please tell me more and i'll be happy to help

Zongshen Aerox... | Answered on May 23, 2011

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Zongshen Experts

Joseph Coppeto
Joseph Coppeto

Level 3 Expert

360 Answers

Tom Chichester

Level 3 Expert

55951 Answers


Level 3 Expert

11377 Answers

Are you a Zongshen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides