Zephyr Logo

Zephyr Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 136 Products
  • 244 Answers
  • 48K Views

I am completely guessing but assume it uses electronic switching?
A standard or old sort of cooker hood use mechanical switches, which would have to be seriously faulty to switch themselves on, though water ingress from condensation entering a switch can over time cause a carbonised track to form that could when damp carry enough current to run a low powered motor or alternatively blow the fuse/trip the RCD if the track is a ground path.

With electronic switching there are usually buttons mounted on a circuit board and in order to produce compact dimensions the tracks are very close together. The buttons usually need only make a momentary contact for a very small current to flow and the brain to switch on the motor.
A tiny drop of water entering this unit can cause mayhem...

Zephyr Kitchen... | Answered on Jun 11, 2020


I would try a hand steamer, it definitely won't affect the stainless and I'm assuming you have a large glass, stainless or tile cplashback. Hope this helps

Zephyr Kitchen... | Answered on Oct 21, 2019


I would suggest taking the see item number did you have email the company or call them as to how to solve the problem if you're already not done so Ice Cube what can be done also try to find another ventilation Hood it is about the same size

Zephyr Kitchen... | Answered on May 17, 2019


The fan light switch blinks when it is time to clean the filter. Clean the filter, then press and hold the switch for 3 seconds to reset it.

Zephyr Savona... | Answered on Jan 30, 2019


not screwing it in tight
not twisting is bayonet type or if fluro tube not rotating the tube 1/4 turn after instakking

Zephyr Kitchen... | Answered on Sep 22, 2018


I am also looking for instructions for PLHV36W6CC.

The fan is on right now but the switch is sliding back and forth loosely.

I just downloaded the manual but that was no help.

If someone has a quick solution, that would be great.

Please email me at [email protected]

I have stuck my hand up and fiddled around but besides just ripping it out, could use some help.

Thanks,

Robert
www.150FastGroup.com

Zephyr Savona... | Answered on Feb 15, 2018


-If only the wire itself burn then just replace the wire. You'll be okay. But if the switch it self totally burn, all the plastic around already melt down then yes it need to be replace.
-If you totally can't get the original one to replace, you can buy one from Lowes and modify to hole to accept it. It'll be okay as well.

Good luck

Mai

Zephyr Kitchen... | Answered on Jan 16, 2018


clean the fat and gunk build up off the fan blades

Zephyr Kitchen... | Answered on Dec 19, 2017

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Zephyr Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Vernon Taylor

Level 3 Expert

6665 Answers

ray gallant

Level 3 Expert

68581 Answers

Are you a Zephyr Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...