Zeiss Science & Laboratory - Page 2 - Recent Questions, Troubleshooting & Support
Ziess /Humphrey atlas 990 servicing
You neef begin by the lowes part. You sjould rest the instrument on tje left side to get the botton screws.
In orther to take the covers you sjoul take away first the chinrest
Printer does not work
Clean it with brushtooth and alcohol and try again. The printer is termic, it needs termic paper, not bond paper
Screen difficult to view on autorefractor
Is because is similar to old tv's. You have to take it out the screw exavtly below the monitor, there is a hole you should introduce a allen key 3 mm .after you take it out the screw uou are able to take the monitor out and move the tv controls on the board, brightness and contrast until you have better image.
How do I increase the field of view on a zeiss
Field of view and working distance vs magnification is a law of physics. Using the lowest power gives you the widest field of view and greatest working distance but the trade of is that you loose magnification. Conversely as you increase magnification you decrease working distance and you loose field of view diameter.
The optics of your microscope are limited to .4x to 2.5x magnification. Your working distance is limited to 200 - 400mm depending on the magnification you are using.
I am not aware of any interchangeable lenses for this scope.
10/24/2014 5:54:31 AM •
Zeiss ...
•
Answered
on Oct 24, 2014
Not finding what you are looking for?