Zanussi Dryers - Answered Questions & Fixed Issues
Zanussi washing machine zwf16070w1 error code 66
Error code 66 on a Zanussi washing machine is a fault code indicating a problem with the control board. The issue could be related to the wiring, the control board itself, or a component connected to the board, such as the heater element.
Since you have tested the heater element and found that it appears to be working correctly, it's likely that the issue is with the control board. However, it's always a good idea to double-check all the wiring and connections before replacing any parts.
If the problem persists after checking the wiring and connections, it may be necessary to replace the control board. Replacing the control board can be an expensive repair, so it's important to consider the cost of the repair compared to the value of the machine. If the machine is old and the cost of the repair would be more than the value of the machine, it may be more cost-effective to purchase a new machine.
2/3/2023 2:02:50 AM •
Zanussi Dryers
•
Answered
on Feb 03, 2023
•
29 views
Galanz error code
I have a galanz airconditioner and is showing an error be there is someone knows what does it means? Thanks
1/4/2022 7:53:24 PM •
Zanussi Dryers
•
Answered
on Jan 04, 2022
•
415 views
Making an electrical noise, but drum not turning. Sounds like it's shorting.
I'd suggest - remove the top cover. Switch on. Push the drum around - see if the drum picks up speed and continues to run. If this happens, it means that the motor Starter capacitor has gone dud and will need replacing.
Note- If the drum doesn't continue to rotate after you shove it, switch off immediately.
It will likely then be a faulty motor.
Zanussi zdc46130w Fault.
I think you should read the instruction manual . 3 beeps means some information to begin a solutin.
Ohow do I remove time delay of a Zanussi Linda 100 condenser dryer
Hi,
When you're setting it up to start, you need to press the start button, but look at the delayscreen.
Keep pressing the start button until the delay-screen show zero delay time.
The options are 0, 1 hour, through to 20 hours, just to help you to know what you're looking at/for.
Best of luck.
3/10/2018 4:03:40 PM •
Zanussi Dryers
•
Answered
on Mar 10, 2018
•
334 views
Not finding what you are looking for?