Yale Locks & Locksmithing - Popular Questions, Answers, Tips & Manuals

this step by step guide should help you reset the lock, if its not the exact same lock, its the closest thing that Yale currently makes. Be aware you cannot reset locks like these unless they are open already, atleast not to my knowledge

Combination Cable lock Reset the combination of Yale travel lock Secure...

Yale... | 5,370 views | 0 helpful votes

Sorry, I don't know anything about them.

Yale... | 662 views | 0 helpful votes

Go to cannonsafe.com and find their help line unless they have online instructions available. Be ready with any serial numbers etc receipt of purchase, where you bought it. They may not readily hand over the info.

Yale... | 406 views | 0 helpful votes

Your lock will need to be seen by a locksmith, who can hopefully pick it open for you, or possibly open it by impressioning. If not it will have to be drilled.

Yale... | 155 views | 0 helpful votes

You can't. Make sure the cylinder is in the upright position, and tap the lock on a bench face down (very hard) it may dislodge it enough to grab it with some tweezers.If no luck, throw it away.

Yale... | 162 views | 1 helpful votes

Lost Combinations or to rest the lock:
Go to this page..... Lost combinations FAQS by master lock http://www.masterlock.com/service-and-support/faqs/lost-combinations
24 7 Locksmith Orchard Park NY 716 710 7400 Locksmith Orchard Park NY

Yale... | 582 views | 0 helpful votes

It is very difficult and for this task you need to follow the manual guide given in locksmith san francisco or if you live there then can hire the locksmith professional as well.

Yale... | 316 views | 0 helpful votes

Look sorry to say but you have created a mess. Now what you have to do is to visit the San Francisco Locksmith website and see the manual guide to fix it. The better option is to hire their services or contact with them to know about fixing this issue.

Yale... | 267 views | 0 helpful votes

take the lock out of the door. strip it down and reset the levers.
more likely to be a 3 or 5 lever lock. 4 are not available.

Yale Locks... | 88 views | 0 helpful votes

All I ever do is start at 001and work my way to 999

Yale... | 1,982 views | 0 helpful votes

does it have a keyhole both sides ?
If so, you will need a Locksmith to pick the lock open first.

Yale Locks... | 142 views | 0 helpful votes

The retaining spring has broken. Just buy another 2 for $11.69. Don't mess around with locks that might work, might not work, might give easy access or might lock you out!

Model No. 131T ' Master Lock

www.masterlock.com > Home & Personal
1-3/16in (30mm) Wide Covered Solid Body Padlock; 2 Pack. Model No. 131T, product features, specifications, service and support from Mater LockĀ®. Shop now.

Locks &... | 19 views | 0 helpful votes

Contact Kingavon directly to inquire.

Locks &... | 14 views | 0 helpful votes


Locks &... | 31 views | 0 helpful votes

Not very 'safe' then. Contact the maker of your mystery safe..

Locks &... | 13 views | 0 helpful votes

Open it up.
Remove the battery.
Leave it for 15 minutes.
Install a NEW battery, yours is nearly depleted.

The battery doesn't have enough power to take your programming demands..

I fixed all the errors in your written question :>)

Locks &... | 52 views | 0 helpful votes

Yes, that never fixes the problem. This explains why, and why you can't diagnose television problems on an online forum. The television sections are really only for help with manuals and remote codes.

Here are similar questions that we see often.

I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ? Or

Turns on and sound works fine, but the picture is distorted (solarized? polarized? not sure what the term is) I replaced the main board, but that didn't fix it.

I have an LG 55LM6200-UE with a dim lower-left. I just replaced both LED strips with no resolution. There is no physical obstruction visible, so this has to be a cable or board problem, right?

So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work as it should! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what it does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part you put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'NO Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous sellers use it as an excuse to get money for selling items that may, or may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $5 in parts and a couple of hours labour. It's not the fix you want to hear, but it is the best advice.

Andrew - Fixya Moderator

Locks &... | 48 views | 0 helpful votes

Not finding what you are looking for?
Yale Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top Yale Locks & Locksmithing Experts

john h

Level 3 Expert

23438 Answers

Tom Chichester

Level 3 Expert

57338 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34141 Answers

Are you a Yale Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides