Woods Freezers - Recent Questions, Troubleshooting & Support


igloo is cold snowflake is warmer.

Woods 201 cu.... | Answered Yesterday


Check with an appliance parts supplier for a cross reference.

Woods Freezers | Answered on Jul 06, 2020


If anyone searching the internet sees this postings, possibly contact Sears:

https://www.searspartsdirect.com/combo/3083-1234585/wc-wood-freestanding-freezer-parts

Woods Freezers | Answered on Jul 05, 2020


It sounds like it is still in Defrost Mode. Did you have to put a button to defrost it? One freezer I had, had a defrost button that you pressed. To cancel the defrost, you had to turn the dial off and then on again.

There is no manual online

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00gbU5q-NxjwCTx3wSuJhlv-z1Qtw%3A1593365521670&ei=EdT4Xru4KOahggeFq634DA&q=Woods+V15HDS+manual

Woods Freezers | Answered on Jul 01, 2020


Woods would be a possible source.

Woods Freezers | Answered on Nov 27, 2019


(GOOGLE) woods freezer/ model #BED15z /repair manual

Woods Freezers | Answered on May 07, 2019


A freezer temperature should be set a 0 F or -18 C

Woods Freezers | Answered on Apr 06, 2019


Put an opened container of Arm and Hammer baking soda in there. It will soak up that new freezer smell.

If you haven't got too much stuff in there, pull everything out and wash it with a 10 to 1 water/bleach solution.

Woods Freezers | Answered on Dec 04, 2018


I have been doing refrigeration work for over 30 years and have never heard of a "rebuild manual" for any unit ever build by any manufacturer. Try to phrase your question with specifically what you want to do and include the serial number as this may also help you cause. Good luck and hope this is of some help.

Woods Freezers | Answered on Aug 13, 2018


Both light flickering probably indicates a problem with the plug or the cord. If it was just the inside light I would suspect the door switch, but both light would indicates an open short in the wires or plug.

Check the plug connection at the wall and see if it is loose. While unplugged check the cord for any nicks or cuts. Plug something else into the same wall receptacle , like a light and see if the power to the receptacle is ok.

If none of the above work then it is time for a qualified repair person.

J

Woods Chest... | Answered on Feb 20, 2018


Freezer should not take more than 2 hours to.be at minus 10celcius. If only cold and not seeing any ice on the inside wall this could mean that there is missing refrigerant in the lines. Other way to check is to feel the pipes on the back if hot to the touch. There is many signs to see if your refrigerator is working or not.
If the compressor is running non stop and is very hot it will tell you that there is missing gas in the system.
If compressor is mot warm and is cycling on and off this could be only thermostat issue.

Good luck

Woods Upright... | Answered on Dec 29, 2017


I would try replacing that overload and relay in the compressor. Your compressor may be shorted out. If it is, replacing relay and overload won't help.

Woods Chest... | Answered on Oct 01, 2017


More info needed like model number will tell us what it has for parts
compressor relay loose wire or alarm board is bad needing replaced

Woods Freezers | Answered on Mar 02, 2017

Not finding what you are looking for?
Woods Logo

222 questions posted

Ask a Question

Usually answered in minutes!

Top Woods Freezers Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Brad Brown

Level 3 Expert

18408 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Woods Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...