Wolf Range Ovens - Page 5 - Recent Questions, Troubleshooting & Support

It's faulty and in some sort of self protect mode. You need a service call or you can try some of the fixes here.

FIXED - WW2780 Jenn-air oven keeps shutting off ...

www.applianceblog.com > mainforums > threads > ww...
Feb 15, 2012 - Hi.... I have a Jenn-air oven model WW2780 that keeps shutting off after being turned on, almost always during the preheat. From what I have ... Missing: WW27430P ‎' Must include: WW27430P

Jenn Air Range Stove Oven - Oven Won't Turn Off - Repair ...

www.repairclinic.com > RepairHelp > Jenn-Air-Oven-...
Here are the most common reasons your Jenn Air oven won't turn off - and the ... Enter model number to search for the required part specific to your product.

HOW-TO: Jenn-Air Oven WW27430P Door won't close

www.appliancepartspros.com > repair-help > ww27430...
Door won't close is the most common symptom for Jenn-Air WW27430P. ... I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom ... Door pulls shut and li8ght stays off.

HOW-TO: Jenn-Air Oven WW27430P Won't start or doesn't start

www.appliancepartspros.com > repair-help > ww27430...
How to Replace Oven Temperature Sensor Kit for Jenn-Air WW27430P Won't start # ... Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. ... Very easy on this and other models with this sensor-- just two screws holding it in ... Rating: 5 · ‎123 reviews


Ovens | Answered on Nov 17, 2020

I don't know but it is unlikely I would think that an oven would have two control boards, perhaps there is one board for the oven and another for the hobs, if it is a cooker rather than just an oven.

Unlikely too I think that anyone would contact a repairer and ask him to discover what is wrong - more likely a person would ask a repairer to come and fix it and then if they don't fix it there would be no charge or perhaps only a nominal call out charge.
Local repairers are competing against the field engineers of the large corporates and so tend to make charges based on their success or lack of...

Ovens | Answered on Nov 13, 2020

bHello can I help you here is the manual http://exga1006.dumb1.com/308.html

Ovens | Answered on Nov 10, 2020

being an old fixer i suggest you call a repair service and pay to have it done

Ovens | Answered on Nov 07, 2020

Contact Nardi directly to request the manual.

Ovens | Answered on Nov 07, 2020

The model ID plate will give you that information. On the rear panel.

Ovens | Answered on Nov 06, 2020

The inner glass is a "sealed" unit and is not intended to be cleaned.

Ovens | Answered on Nov 03, 2020

No details given as to to make and model, so we GUESS!!

The F0 error code indicates a Failed Thermistor Control. Resolution: The following is the procedure to clear the circuits for the F0 error code: Power off the unit, wait 5 minutes then restore the power. ... Down" and "Minute Down" keys simultaneously for 3 seconds, then the time of day will be displayed.Jan 25, 2010

What does the F0 error code mean on my Kenmore double ...

Ovens | Answered on Nov 03, 2020

Grill door is controlled by a pair of complex spring-loaded hinges and it seems the springs aren't doing the job - this might be because the hinges are tight, which would be a matter of lubrication, or because the springs are weak or broken.

The hinges usually aren't easy to access so it is best to try lubrication first by spraying with something like WD-40 fitted with a straw so it can reach into the apertures and then work the door for a couple of minutes to see if there is an improvement.
Be aware the propellant is highly flammable but it does disperse quite quickly.

If there is no improvement, the hinges will need replacing.

Ovens | Answered on Nov 01, 2020

Since you just purchased it, contact the vendor to request, or ask if warranty available to return for a refund.

Ovens | Answered on Oct 31, 2020

thermostat fault or control dial /buttons faulty



Ovens | Answered on Oct 20, 2020

Good evening! For you to work? There are a lot of such services, I have never used any of them, but now I prefer to buy accounts in the online service
Here the prices are adequate and the accounts are live (pumped up). Go to the site that I sent you. Select the quantity that you need, there will be a price right away, the accounts will be provided to you on the day of payment, the service is verified.

Ovens | Answered on Oct 17, 2020

Will need to check for power behind the stove and take it from there as to what is next, the power circuit from the breaker or the stove itself.

Ovens | Answered on Oct 07, 2020

First I would say to unplug it wait a couple seconds and plug it back in case it got a power surge from the power going . Then reset the clock! Right now it's set in a power saving mode until you do the steps above!

Ovens | Answered on Oct 03, 2020

Not finding what you are looking for?
Wolf Range Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top Wolf Range Ovens Experts

Harjeet s. bola
Harjeet s. bola

Level 2 Expert

49 Answers

ray gallant

Level 3 Expert

70711 Answers

jenifer ronan
jenifer ronan

Level 1 Expert

11 Answers

Are you a Wolf Range Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides