Wolf Range Logo

Wolf Range Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 48 Products
  • 216 Answers
  • 21K Views

I had a Wolf 30F wall oven with a similar problem
after power outage. It wouldnt stop beeping with error message related
to temperature control. My solution was to turn power of at circuit
panel, then reset by pressing and holding the clear button for 5
seconds.

Also note: in my case I had to close the display
before switching the panel off. When I tried to the reset process with
the panel showing, it wouldn\'t reset.



To reset other
various parts of the control panel Instructions said:



Time-of-Day Clock

Immediately after the oven is installed, set
the 12-hour clock to the current time of day. It may need to be reset
after a prolonged power failure. The clock is visible on the control
panel during all modes. If the upper oven timer is set, the clock will
not be visible in the upper oven control panel display.



SETTING CLOCK

1) Touch CLOCK.

2) Touch number pads to
set current time of day.

3) Touch CLOCK or ENTER to start
clock.



24-HOUR CLOCK

The time-of-day clock can be
changed from a 12-hour clock to a 24-hour clock. After the clock has
been set, touch TEMPERATURE for three seconds, touch CLOCK, and then
touch ENTER. Follow the same sequence to change back to the standard
12-hour clock setting.



Fahrenheit to Celsius

The
oven can be changed from Fahrenheit (°F) temperature to Celsius
(°C).

Wolf Range Ovens | Answered on Jun 04, 2020


Hello Joni;

My name is Peter. I am a retired field service appliance technician.

The error coded means: Short circuit in PT sensor or in its wiring.

Wolf Range... | Answered on Jun 04, 2020


I just installed a Wolf gas cooktop and had the same problem in that all 4 burners would light just fine but the electronic igniters would not stop clicking on all four. What I found was that the electrical outlet that my gas cooktop was plugged into had the polarity reversed. I tested the outlet with a polarity testing module (you can get one at Home Depot and it checks polarity, grounding, GFI and is handy to have around, small and inexpensive). I plugged it in and the lights told me that the polarity was reversed. I reversed the wires in the outlet (exchanged the white and black wires) put the cover back on, plugged in the cook top and now it works like a champ! no more constant clicking. By the way, we had a cooktop before this one with electronic ignition and never had a problem, apparently it didn't care about the polarity.

Wolf Range 18... | Answered on Sep 11, 2018


defective ignitor. Oven ignitors can glow and allow enough current through to open the oven gas valve but just not produce enough heat to ignite the gas immediately

Wolf Range... | Answered on Mar 12, 2018


Fuse won't let it shut off? That doesn't make sense. A fuse is made to connect something not disconnect something. I don't know how much you paid that repair man but I would probably call another to verify the diagnosis.
Good luck.
Semper Fi,
Z

Wolf Range 30... | Answered on Feb 01, 2018


there should be an adjustable air shroud around the burner tube
for safety sake and to ensure that what you suggest is the real problem and not a symptom, get in gas fitter to diagnose the fault
faulty power turns off a breaker
faulty gas explodes a house

Wolf Range... | Answered on Dec 13, 2017


Dual Fuel Range Error Code 07 ' FAQ ' Sub-Zero and Wolf

www.subzero-wolf.com/.../dual-fuel-range-error-code-07

Sub?ZeroCore Issue: Dual Fuel Range error code 7; ERR 07 displays on Dual Fuel; Error 07 on control panel of Dual Fuel ... Convection Steam Oven Error Code E75.

L Series Built-In Oven Error Code COMM ERR ' FAQ ' Sub ...

www.subzero-wolf.com/.../l-series-built-in-oven-error-code-co...

Sub?ZeroCOMM ERR displayed on an L Series Built-In Oven indicates a communication error.Reset the unit's power at the circuit breaker. Turn the unit back on to see if ...

WWD30 Warming Drawer Error Code 40 - Sub-Zero and Wolf

www.subzero-wolf.com/.../wwd30-warming-drawer-error-cod...

Sub?ZeroError 40 on a Wolf Warming Drawer. Steps to Verify Issue: With error 40 on WWD30 warming drawer try the following before calling service: ... x. PF Error Code on Warming Drawer ... Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. ... Wolf Cooking.

Wolf DF304 beeping after turning off the oven - The Kitchen ...

appliantology.org > ... > The Kitchen Appliance Repair Forum

Wolf Range... | Answered on Dec 25, 2015

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Wolf Range Experts

Paul Carew

Level 3 Expert

3527 Answers

ray gallant

Level 3 Expert

70831 Answers

jenifer ronan
jenifer ronan

Level 1 Expert

11 Answers

Are you a Wolf Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...