Wharfedale Televison & Video - Page 2 - Popular Questions, Answers, Tips & Manuals
My TV wont turn on
I suspect that the power supply board has failed and needs to be replaced. It is also possible that the capacitors on the board have failed as well and can be replaced to save the original board.
10/4/2014 12:23:48 PM •
Wharfedale...
•
168 views • 0 helpful votes
Tv won't power up straight away
when lcd tv`s fail to power up, but stay on standby. It is usually because of bad capacitors on the power board. My 22" lcd monitor did the same. It would not come off of standby. It starts with them being slow to turn on. "Sound familiar"? I fixed mine by changing the bad caps. There were two of them.
1/31/2013 7:40:41 PM •
Wharfedale...
•
278 views • 0 helpful votes
When connecting tv to pc i'm getting an error message 'no signal input detected'
Did you click on the source button? Also you have to go to your desktop right click with the mouse thern click on properties you will go to your display settings you should see 2 display squares 1 & 2. now you can clone or extend. Another thing it would help to let us know you OS ie win xp or 7 or whatever. Whether you've got Nvidia or ATI or onboard Graphics. So I'm just giving you the basic info..Hope that helps Merry Xmas.
12/27/2012 3:19:39 PM •
Wharfedale...
•
88 views • 0 helpful votes
The sound goes on and of when watching a movie
see the cause and fix it: God bless you
- Check if the TV and Amplifier
(if connected) is turned on and set correctly.
- Check if the TV, DVD player
and Amplifier are connected properly.
- Make sure the TV, DVD player
and Amplifier volume are not set to Mute.
- There will be no sound output
during Reverse Play / Pause / Step /
Slow / Search.
- If the DTS soundtrack is
enabled in the DVD Disc Menu, but you are using Stereo
Analog audio, the sound will not work. Try switching the
soundtrack to Dolby 5.1 or PCM mode in the Disc
Menu.
7/21/2012 7:06:20 PM •
Wharfedale...
•
172 views • 0 helpful votes
Wharfedale dvdr24hd169f stays in standby no displays wont accept commands
The problem is in the power supply board, often caused by a defective capacitor that becomes open, cap value is usually around 1000uf and sometimes shows a bulge at top leaking contents, if you are handy with a soldering iron replace part with identical value and voltage rating and observe the polarity.
6/9/2012 2:12:27 PM •
Wharfedale...
•
329 views • 1 helpful votes
Wharfedale ne-2303
HelloAre you sure the laser lens is clean? if not get a CD player cleaning kit from Walmart and clean the laser lens first. The kit is really easy to use read and follow the kits instructions. Also make sure the CDs are clean and not poor copies of the original. Thanks for using Fixya.
6/18/2012 2:14:21 PM •
Wharfedale...
•
204 views • 0 helpful votes
TV HAS RED LIGHT SHOWING WILL NOT SWITCH ON
Hi, The red light shows there is power connected to the set. The fact that it won't power up is due to a problem with the power supply circuit in the set. or a problem with the switch circuit or the mains power transformer. Regards John Ps don't know why they're giving me these questions, I answer questions on auto's
2/12/2012 2:17:53 PM •
Wharfedale...
•
346 views • 0 helpful votes
Not finding what you are looking for?