Westell Wirespeed Computers & Internet - Page 2 - Recent Questions, Troubleshooting & Support

Here is the link to Westtel Support and docs.

http://www.westell.com/technical-support/technical-support-2.html

You will need the exact model # for the manual.
ie: B90-327W15-06

I did notice that some models are handled directly from Verizon.

If this helps please let me know...
Tim

please contact Verizon's Premium Technical Support and ask assistance for port forwarding if you want to use another router to your Verizon's network.please contact 1-800-567-6789 and ask for Premium Technical Support.

not sure why it would affect your router if your getting a redirect virus. it has to do with your pc instead. do a full virus scan on your PC.
to reset your westell router just hold the reset button on the back for 30 seconds when you power it on.

I found something on amazon, take a look here: Amazon com westell a90 7500 manual. I hope this was helpful. cheers

Pay for it. Your speed is limited by your ISP. Unless it's limited by your distance from the CO; in which case you are limited by physics.

It is clear you have not setup encryption within the router. You need to access your router, go into the router setup and setup security normal wpa2 or wep pending your computers and operating system in use. It will ask you for a secret passkey to enter. Without having this setup any one can cannot to your wireless router. But once the passkey has been setup only you will be able to access it. Very easy fix. if your do not know how to access your router control follow the instruction manual that cam with it, it is normally well explained or just contact me again. regards Hands of Time.

At the back of your router there is a small pinhole with the word "reset" printed just below the pinhole. Use a paperclip push it softly into the pinhole until you feel it makes contact with this switch, press in and hold for 3 to 5 seconds. That will do the trick. Cheers HoT.

Most likely bad connections. Tighten all cable connections.

Re establish the connection by hooking up a data cable from you computer to your router. Once re established you can be wireless again.

Where are you entering it? (In the router it should be) and simply enter "change password" you will then need to enter this new P/W into your laptop / PDA / iPhone etc.

Try this