Water Heaters - Page 9 - Answered Questions & Fixed Issues

not a clue try calling your best local plumber once

Water Water... | Answered on Apr 08, 2019 | 140 views

At the bottom near the drain!

Water Water... | Answered on Apr 06, 2019 | 146 views

Not so crazy. What gas regulator do you have hookup-single or double stage?

Water Water... | Answered on Apr 01, 2019 | 191 views

You need an engineer. It is dangerous to use. Error code 991 Improper gas combustion - see the error code 101.
Keep in mind that for some error codes, you might want to reset the computer to clear the code. For detailed instructions when troubleshooting AO Smith condensing water heaters use this link, which opens in PDF.

Error code 101 Improper gas combustion - check if there is an obstruction in the air flow; on the heat exchanger, venting system, fan and burner and clean it. Abnormal gas combustion might also be a result of the extreme weather conditions such as high winds or incorrect gas pressure.



Water Water... | Answered on Mar 29, 2019 | 137 views


Water Water... | Answered on Mar 29, 2019 | 140 views

Fuses blow for a reason, usually a short circuit. Could be time to replace the heater.

Water Water... | Answered on Mar 19, 2019 | 171 views

May need to call a service to check.

The following gives a variety of brand names.


Water Water... | Answered on Mar 14, 2019 | 160 views

That depends on the local building code. Hot water may not be a requirement for a habitable dwelling. For instance, heat is required but airconditioning is not. Check with the local AHJ (Aria having jurisdiction). Building Inspector and permits or community development

Water Water... | Answered on Mar 13, 2019 | 147 views

we can only assume the heating element has failed .repair,em are hard to find world wide sad to say ,they seem to want more than a new unit will cost

Water Water... | Answered on Mar 12, 2019 | 150 views

first define skittles??? second name the boiler type. is it a condensing boiler?? is the pump bad? frozen maybe?

Water Water... | Answered on Mar 10, 2019 | 145 views

You will need a clamp on amp meter to check current draw. the thermal cutout tripped because the temp exceeded the safety limit.

Water Water... | Answered on Mar 10, 2019 | 152 views

possible calcium buildup try pushing down and turning

Water Water... | Answered on Mar 07, 2019 | 175 views

Not finding what you are looking for?
Water Logo

Ask a Question

Usually answered in minutes!

Top Water Heaters Experts

Don Walper

Level 1 Expert

36 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2020 Answers

Are you a Water Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides