Vulcan Grilling - Page 7 - Recent Questions, Troubleshooting & Support
Hi - my gas connection between one of my burners and the gas connection inside came undone - how do I get it reconnected?
It would be helpful if you posted the model number. There are several types of connections. Some are threaded and usually use a gas-compatible thread sealant compound or thread tape (be certain the sealant is specified for natural gas or propane!).
Some are simply flared friction fittings, possibly with an internal gasket ring. Inspect the gasket if any, and if it is in good condition, just push it back together. If the metal is worn, corroded or cracked, replace the part.
Some outdoor grills use hoses with fittings crimped on the end. If the fitting has come off, check the hose to see if it is cracked or dried up. If this is the case, replace the hose. You should probably replace the connector even if the hose is good; the crimp is not trustworthy if it has come apart.
Less common is welded or brazed connections. If this has come apart, have it professionally repaired or buy a new connector assembly
6/4/2019 10:38:09 PM •
on Jun 04, 2019
Traeger fan wont work
Sounds like a part failed. Call Traegger support at 1 (800) 872-3437
6/2/2019 5:36:01 PM •
on Jun 02, 2019
Cb-6000dlx-w char broil bbq. (4646166)
Barry, short of contacting Char-broil Customer Support 1-866-239-6777, I doubt there is one available.I checked my list of over 100 Char-Broil models and it wasn't on it. In addition, you may need to replace the Hose/Regulator that came with that model, as it probably won't fit today's grill tanks. But, it's not a big deal. You can pick one up at any hardware store or home improvement center that sells grills and accessories. The run about $30.00.
Good luck in your search and thanks for choosing FixYa.
6/2/2019 12:35:14 PM •
on Jun 02, 2019
Not finding what you are looking for?