Vtech Tablets & eReaders - Answered Questions & Fixed Issues

you can use vtech ac adaptor...

is there any sound at all coming from the toy? if there"s no sound try pressing the power button down for 30 secs without any powersource...after that place batts back in and try turning it on. if it doesnt work you may want to call their hotline

try usiing just the charger without the rechargeable batts...if toy turns on with just that then prob maybe eiither the toy itself or you need new rechargeable batts

go to this link : http://www.vtechkids.com/download/ you should be able to find a link to download the app for it3s there

the charge imdicator is suppose to blink when you plug the toy to the wall adaptor. if it doesnt blink then there's something wrong with either the adaptor, the adaptor port on the toy or the rechargeable power packs. now i said that the light is suppose to blink. but the frequency of the blinks shouldnt be fast. if that's the case clean the compartments and re-insert the batteries. if you are still having problems try the ff T/S:

1)remove the power packs, plug the toy to adaptor and turn it on. if it turns on that means your adaptor is working.
2)remove the adaptor and try using just the power packs.
3)try using 4aa batteries.

if the toy turns on with only one of the power sources stated above you better call vtech hotline.

The volume control does not work? I think this one is already defective and needs to be replaced.

have you tried calibrating the screen? You can do this by pressing the Home Button, question mark, and volume up button all at the same time. Turn the toy on without letting go of the other three buttons until you see the Touch Calibration Screen. If this does not help, then I suggest you call Vtech. Contach info is available at www.vtechkids.com if you no longer have the manual.

yes you can. Go to Downloads section on www.vtechkids.com. But in order to transfer the games into the toy, you need to connect it to a computer where Learning Lodge is installed.

Yes. Just replace the batteries. If you're still getting the same issue even after replacing the batteries, then toy might be defective.

Has this problem been resolved? If you still get this issue I suggest you call the Vtech hotline. Contact info can be found at www.vtechkids.com

Are you getting any error message when installing the Learning Lodge? To delete info on toy go to Settings>>My Name>>type R-E-S-E-T then tap the check mark on top right corner of the screen. Toy will turn off automatically if reset is successful.

Did you use the CD that came with the toy? uninstall it completely from your computer and download the link from this site: www.vtechkids.com/download. look for the picture of the toy that you have and click on it. then just follow the prompts from there.

Try recharging the batteries, or try using another powersource. if this does not resolve the issue then you may need to call their hotline

Try to uncheck the checkbox indicating administrative account thay holds up to secure data..

"rom"? What exactly are you trying to do? Are you referring to ROM as part of the tablet's memory? If yes, you probably will not be able to do it. ROM is a memory chip built onto the circuit board itself inside the tablet. You would need to completely dismantle the tablet to do it. Most tablets are not built to be taken apart for repairs.

Question edited for clarity, add maker. Not a good idea posting your email address as a user name!! This site get 11 million viewers a year including thousands looking for addresses to harvest and spam. We don't email answers, it is all done on the site. You have to turn it off and then hold the buttons. https://www.google.com/search?q=naxa+Nid1070+tablet+reset ..

It is a non-proprietary see through charger as seen here https://www.google.com/search?q=jp5+tablet+charger ..

Contact pinterest support on this problem.

If a power cycle does not resolve your issue, you may need to perform a hard reset. To do so press and hold the Sleep/Wake button and Home button until the Apple logo will appear and iPad will reset. You can also perform a factory device reset.

Apple iPad 4th Gen (2020) - Reset Device - AT&T

How to Hard Reset or Restart an iPad (All Models)

Lifewire https://www.lifewire.com > Apple > iPad Oct 19, 2023 - For iPads without Home Buttons: Quickly press volume down, then quickly press volume up, then press and hold the on/off button. Skip to step 3. ..

Press the On button on the ONN tablet :>D https://www.google.com/search?q=start+my+ONN+tablet ..