Vtech Lands Phones - Page 8 - Popular Questions, Answers, Tips & Manuals
How do I change the number of rings before it goes to voice mail
The manual is available from:
http://www.manualslib.com/download/678020/Vtech-Cs6859.html
--
( be sure to ignore the advertising large button
"start download" and use the smaller button "download"
across the top banner "downloads" "table of contents" etc. )
then enter the security-codes & click "Get Manual"
then click 'Download pdf'' etc. )
The directions to set the number of rings for the
Answering System are on page 51.
To summarize Setting the Number of Rings:
1. press [MENU]
2. scroll up/down to "Ans System" then press [select]
3. scroll up/down to "Ans System Setup" then press [select]
4. scroll up/down to "# of Rings" then press [select]
5. scroll through the choices, at desired one press [select]
6. press [off ] to conclude & exit
============================
Good luck!
How do I delete from the directory?
Try the following:
press [directory] (the phonebook icon, top center)
scroll to the entry to be deleted
press [delete]
display reads "Delete Contact?"
press [select] to confirm
display reads "Deleting..."
display reads "Contact Deleted", (chirps)
display shows the next entry in the directory
Good luck!
-------------
I bought a base and one extension phone - no problem - bought another extension phone and it will not register
The new phone must fit into the base cradle for registering to even be attempted. You gave no model numbers, it is likely your newest handset is not compatible with the rest of your system... but we can sometimes "cheat". If the new handset is displaying "To register, place on base..." but it simply does not fit -- try removing the battery cover and see if wiggling the handset will allow the "charging" lamp to come on: then wait to see if it will register. You can find the base model number on a small sticker on the bottom of the base, the handset model numbers are on stickers under the battery.
Why do my VTech phones says outer range or no base on both of my phones
www.
vtechphones.com/support/.../353
VTech Communications Inc.Out of range OR No power at base is shown in the handset display window. Why don't ... Tip 1 of 5. Confirm proper installation of the telephone base and charger power adapters, and handset battery. You should only use the VTech power adapters provided with your telephone. ... Next Tip This solved my problem. Tip 2 of 5.
www.
vtechphones.com/.../frequently-asked-...
VTech Communications Inc.Have a question about VTech cordless phones? Visit our ... How do I find my model number ... My battery pack does not last very long between charges.
How do I set the number of rings?
These are instructions on how to set the number of rings before your iPhone goes to Voicemail. You can increase or decrease the amount of time your iPhone rings by following the simple steps below. Press the Phone icon in your iPhone's dock. Press to select Keypad from the tabs at the bottom of the screen.Jan 25, 2009
www.iclarified.com/.../how-to-set-the-number-of-rings-before-your-iphone...
How do i set the time and on the base of a vtech phone
Robert, this info is out of the manual from link below courtesy of vtech Canada support.
If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. You can also set the date and time manually. Press MENU when the handset is not in use. Scroll to select >SETTINGS, then press SELECT. Scroll to select >SET DATE/TIME, then press SELECT. Use the dialing keys (0-9) to enter the month, date and year, then press SELECT. Use the dialing keys (0-9) to enter the hour and minute. Press or to choose AM or PM, or press 2 for AM or 7 for PM. Press select to save.
http://www.vtechcanada.com/support_docs/vtt/CS/CS6429_en_acib.pdf
How do I set up the answering system on the Vtech?
Try this:
press [menu]
scroll to "Answering Sys"
press [select]
scroll to "Ans Sys Setup"
press [select]
--- ( begin the setup item list )---
==1== as you scroll to each item to be set up,
press [select] to address that item
scroll through that item's choices,
then press [select] to confirm the choice selection
(chirps) and returns to the setup item list
==2==scroll to the next item
press [select] to address that item
scroll through that item's choices,
then press [select] to confirm the choice selection
(chirps) and returns to the setup item list
==3==scroll to the next item
press [select] to address that item
scroll through that item's choices,
then press [select] to confirm the choice selection
(chirps) and returns to the setup item list
==4== etc.
when finished, press [OFF] a few times to back up to "Handset #"
Good luck!
--------------
Not finding what you are looking for?