Vtech Lands Phones - Popular Questions, Answers, Tips & Manuals


then buy a new phone we know of no fix

Vtech Lands... | 17 views | 0 helpful votes


The VTech CS6124 does not have a DND feature. The ringer volume could be set to Off. For the handset(s), press Menu (the big round button below the LCD screen) on a handset when the phone system is idle (no handsets in use). Use the arrow keys (CID/Vol- and Phone Book/Vol+) to navigate to Ringers and press Select (same as the Menu button) twice. Press the Vol+ to increase the volume. You will hear the current ringer volume. Repeat pressing Vol+ until you reach a volume that you prefer. Press Select to save the setting and then press Off to exit the menu system. To adjust the ringer volume at the base, press the Up/Down buttons when the phone system is idle.

The manuals are available from VTech's product support page: https://www.vtechphones.com/support/technical-support/product/1516 . The full manual is currently available here: https://cdn-web.vtp-media.com/products/CS/CS6124/CS6124-X_WEBCIB_V7_20190916.pdf . See pages 16-17 (page 23-24 of the PDF).

I hope this helps.

Cindy Wells

Vtech Lands... | 16 views | 0 helpful votes


question?

Vtech Lands... | 89 views | 0 helpful votes


If you don't have the owner's manual, try searching the internet for a copy. If that doesn't work, search the internet for Vtech customer support.

Vtech Lands... | 162 views | 0 helpful votes


Delete the recorded messages, by pressing the reset switch, or goubg through menus if yiu have a display.

Vtech Lands... | 193 views | 0 helpful votes


Here is the internet address for the phone's user manual. Read the settings instructions.
https://www.manualslib.com/manual/745244/Vtech-Cs6124-11.html

Vtech Lands... | 142 views | 0 helpful votes


I think you can change it go to menu settings go to language and it should have english and just change it to english.

Vtech Lands... | 132 views | 0 helpful votes


MAke sure the fuse in the inside is not blown

Vtech Lands... | 110 views | 0 helpful votes


Check for marginal line voltage. It should be 48 v with 23+MA of current.

Some phones have a setting for use behind a PBS that will allow for lower voltages though.

Vtech Lands... | 954 views | 0 helpful votes


To activate the CALLS WITHOUT NUMBERS feature: When the phone is idle, press MENU/SELECT. Press VOLUME? until you see Call Block, then press MENU/SELECT. Press VOLUME? until you see Calls w/o num, then press MENU/SELECT.

Vtech Lands... | 140 views | 0 helpful votes


New battery may need charged, and/or base charger may be bad. Try a different base, preferably one that is known to be working. Or if possible, take the battery from identical type of handset (that works) and try in suspect unit.

Then threre's always the possibility the handset is kaput.

Vtech Lands... | 42 views | 0 helpful votes


Unplug the battery from the phone (handset) for 1 minute and also do the same for the base simultaneously, replug them and repair the to each other if you have to and then give it a try, also try and clean out the mic holes eat the bottom of the phone and make sure its not on must , do not disturb, or any other feature enabled that a would cause you to have such undesired function. I hope this help and for expert help you can find it here https://www.6ya.com/mr.mike and if you need more help you can always ask another question

Vtech Lands... | 55 views | 1 helpful votes

Not finding what you are looking for?
Vtech Logo

4,455 questions posted

Ask a Question

Usually answered in minutes!

Top Vtech Lands Phones Experts

Cindy Wells

Level 3 Expert

6197 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Bruce Robin

Level 2 Expert

300 Answers

Are you a Vtech Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...