Viper Computers & Internet - Recent Questions, Troubleshooting & Support
Viper 5904 viper delete codes
Keep in mind once you erase you current remotes NONE of them will work until you program/pair them back again with your alarm. The 2-way remotes are different to pair than the 1-way. Having said that it's pretty simple to delete/unpair the remotes. I'm gonna try to keep it as simple as I can. The alarm has to be disarmed and NOT in valet mode. Step 1 open door (keep door open thru entire operation)Step 2 turn ignition to ON position (not accessory) Step 3 within 10 seconds press program/control button on antenna twice (push and let go, push and let go. DO NOT HOLD) Step 4 NOW press and hold program/control button again (DO NOT LET GO) you'll hear siren chirp Step 5 while still holding program/control button press the LOCK button on your remote control the siren will chirp again confirming remotes have been successfully deleted/removed. Step 6 let go of program/control buttonStep 7 close ignition switch to finish everything you did. NOW you have to pair ALL your remotes back to the system.Hope this helps. Funny thing same thing happened to me with the car option 1 and car option 2 remote.
Remove sleep mode
control panel - personalization - set screen saver then
control panel - power options - when to turn off the display and change when the computer sleeps
Remote starter not working
Check to make sure the remote start kill switch isn't broken. There should be a switch under your driver seat or gas pedal that turns your engine off if someone tries to drive off with your car while you're warming it up. If that switch is damaged, it can trick your remote start system into thinking there's someone in your car, and preventing the system from starting up at all.
Battery is draining
You probably have a short circuit or a button contact that is constantly pushed in and using electricity. Try using some CRC or WD40 spray on the buttons and exercise them to smooth out their return to normal action.
Diamond Radeon HD3870, 512MB DDR4
According to ATI this is a known issue. They refer problems to microsoft about this error as they say it is an o/s issue. Microsoft refers you back to ATI saying it is a thermal issue. I have an ATI card as well & have the same problem. Hopefully the next driver will fix this issue when released. Hope this helps.
plz dont use vista !
use xp for game performance ...ur vga driver may not have the ability to install
so use xp
Can mining Ethereum be a profitable business venture?
It depends on the combination of hardware, energy consumption and available mining space. Compare it to Bitcoin...in the initial stages was easier to do mining without special hardware, but later was not possible to do any profit without specialized hardware and joining groups to work in certain sectors.
For Ethereum it is matter of time and available resources like mining in the real world.
Not finding what you are looking for?