VeriFone Televison & Video - Answered Questions & Fixed Issues
I need to bypass the
See answer from here:
http://www.fixya.com/support/t1752793-system_password_verifone_vx670
Nurit 8020 - Change NOS - Remove SECURE
If you are just reloading a NOS in your Nurit 8020 machine, even if your machine is secured you should be able to load it, make sure your com1 baud rate setting is the same, your 8020 is set to 115200 baud rate, and should set up your com1 at the same speed...hope this will help and if you still need more help you can call us at (775)358-2922 ask for Randy. Thanks
3/21/2017 3:55:39 PM •
VeriFone...
•
Answered
on Mar 21, 2017
•
1,092 views
I need to reprogram our Tranz 380 for new payroll company
What you need to do is to call the customer support line from this new company and have them walk you through the process. What the terminal needs is a new load of software. They can walk you through that process and help you if there are any problems with it.
Verifone 510vx that is stuck in check mode
if you have a seperate check reader for your terminal. start by unplugging the credit machine power source from side, then unplug all other devices from credit machine. clean the reader with canned air, never use liquid. plug in the devices and the power source last, this should fix the issue. if it does not you can
8/19/2014 11:03:40 PM •
VeriFone...
•
Answered
on Aug 19, 2014
•
178 views
Hypercom t7p RBOUT OF BALANCE error
What that means is that there was some sort of communication error in the machine. In my case, a credit card payment went through to the merchant services but not through my machine. The balances did not match. Call the customer service number on your machine and they will fix it within a minute!
5/13/2014 12:45:37 PM •
VeriFone...
•
Answered
on May 13, 2014
•
6,076 views
System mode entry password
Hello, we can provide a modified software/firmware for verifone with offline mode also with fully specifications including SDK source codes, contact us at
[email protected] for more details.
1/28/2014 3:37:50 AM •
VeriFone...
•
Answered
on Jan 28, 2014
•
332 views
VX510LE I have four terminals that were working
Make sure your connection is good and live, but yes, a setting got changed. Call your payment support center and get the directions and specifics for their receivers and your terminals. Normally they can walk you through it. Ours does.
11/2/2013 6:53:38 AM •
VeriFone...
•
Answered
on Nov 02, 2013
•
58 views
Anyone have any info on
VeriFone NOS 6 Operating SystemVeriFone has assigned “end of life” status to the NURIT NOS 6 operating system. The terminal manufacturer previously announced that it would discontinue support for NOS 6 applications and stop offering NOS 6-to-NOS 7 upgrades on October 31, 2009.
On July 1, 2010, VeriFone will permanently shut down the loader required to convert from NOS 6 to NOS 7, making the upgrade unavailable to all models of NURIT terminals.
Merchants who wish to continue receiving support for impacted NURIT terminals are strongly encouraged to update their operating systems (if possible) prior to the July 1 deadline. Currently, there are three devices in the marketplace that may be eligible for the NOS 6-to-NOS 7 operating system upgrade:
- NURIT 2085 03
- NURIT 2085 04
- NURIT 2085 21
To notify eligible First Data Independent Sales customers, they will include a message in the May 2010 month-end merchant statement (scheduled for release in early June) advising NURIT 2085 users to contact the Omaha POS Help Desk to update their terminals.
To do the same call on:866-783-8380
6/10/2013 7:54:41 AM •
VeriFone...
•
Answered
on Jun 10, 2013
•
965 views
I have a Nurit 8020
Nurit OSP Loader is the the program we use to remove the TAMPER error.
Replacing the internal battery and reloading a fresh NOS (nurit
operating system) will remove the error. Check our website at
freshpoint.org or call us if you can at (775)358-2922 . It
can be fixed, you don't need to replace it. thank you.hope this help : - )
12/13/2012 11:18:33 PM •
VeriFone...
•
Answered
on Dec 13, 2012
•
1,380 views
I have a VeriFone Omni
If the printer does not work properly:• Check battery status or terminal power connection. The printer will not print ifthere is an insufficient charge remaining in the battery to complete the printoperation. (For Vx610 terminals only.)• Check if the printer is out of paper and that the roll is properly installed. Openthe paper roll cover and install a new roll of printer paper or ensure that the rollis feeding from the bottom.• Verify that the printer roller and paper roll dust cover are properly installed.• If the problem persists, contact 775-358-2922 hope this help : - )
8/29/2013 12:15:58 AM •
VeriFone...
•
Answered
on Aug 29, 2013
•
1,367 views
Dropped my nurit 8020 on the ground. Now when I
To make it useable we need to remove the tamper first. Nurit OSP Loader
is the the program we use to remove the TAMPER error. Replacing the
internal battery and reloading a fresh NOS (nurit operating system) will
remove the error. Check our website at freshpoint.org or cal us if you
can at (775)358-2922 . It can be fixed, you don't need to
replace it. thank you. hope this help : - )
9/6/2012 5:06:09 PM •
VeriFone...
•
Answered
on Sep 06, 2012
•
503 views
My verifone vx510 won't print
Receipt Feeds,But Nothing IsPrinted
On It
Not using thermal paper.
Ensure thermal paper is being used.
Thermal paper loaded upside down.
Ensure thermal paper is being fed from underneath the roll, as it will only
print on one side of the paper.
9/6/2012 4:03:34 PM •
VeriFone...
•
Answered
on Sep 06, 2012
•
3,540 views
Can i fix the tapered divice myself
NO you need the software to clear the tamper and the battery is easy and or better to let a professional do it.bad RTC can be repaired. the machine is equipped with multiple
sensors inside. if one of them goes bad, or the Battery is dead
tampering or bad RTC will show this can be fix by replacing the sensor
and or the battery if you need this to be done call me @ (775) 358-2922
hope this help : - )
8/1/2012 6:12:31 PM •
VeriFone...
•
Answered
on Aug 01, 2012
•
168 views
Physical Tamper device
bad RTC can be repaired. the machine is equipped with multiple
sensors inside. if one of them goes bad, or the Battery is dead
tampering or bad RTC will show this can be fix by replacing the sensor
and or the battery if you need this to be done call me @ (775) 358-2922
hope this help : - )
8/1/2012 6:01:41 PM •
VeriFone...
•
Answered
on Aug 01, 2012
•
191 views
I have a verifone nurit 8020, When i go to reset
To make it useable we need to remove the tamper first. Nurit OSP Loader
is the the program we use to remove the TAMPER error. Replacing the internal battery and reloading a fresh NOS (nurit operating system) will
remove the error. Check our website at freshpoint.org or cal us if you
can at (775)358-2922 . It can be fixed, you don't need to
replace it. thank you. hope this help : - )
8/1/2012 5:57:30 PM •
VeriFone...
•
Answered
on Aug 01, 2012
•
2,093 views
Not finding what you are looking for?