UTStarcom Logo

UTStarcom Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 30 Products
  • 236 Answers

configure received message settings:

1. From standby mode, press the OK Key [OK] to unlock the keypad,

then press the Left Soft Key [Message], then the Left Soft Key

again for [Settings].

2. Press the Directional Key up or down to highlight one of the

settings below, then press the OK Key [OK] to select it:


Sets an Entry Mode as a default. For example, if Abc Mode is the default, its icon

will appear.

1. Select "Abc", "ABC" or "123" by pressing the Directional Key up or
down then press the OK Key [OK].

UTStarcom Blitz... | Answered on Jan 07, 2011

It may be a problem with service provider or singnal strength.This may lead to server time out and you lost the link.
Another chance is regarding your phone settings.Contact the customer care and set correct Wap,Internet settings

UTStarcom Cell... | Answered on Jan 01, 2011

You can generally get a free unlock code for your mobile handset by calling up your cell phone carrier and requesting one. In exchange they will need you phone's IMEI number which you can get by typing *#06# on your dial pad. If you cannot get a free unlock code, I would suggest looking through these unlock codes and guides. I hope this helps you and good luck!

UTStarcom... | Answered on Dec 19, 2010


Ok i just had the same thing wrong with my phone.....locked out reading on here...i 1st tried 0000,did not work ....them next i tried1234,did not work...the phone i have is the-
UTStarcom7126c it was only used on one cricket phone/account before i got it... my brother bought new.....so i was told,if it wasn't the 0000 or 1234 it would be the last 4 digits of the phone number if it hadn't been changed from factory default...and had said,he had never changed the lock code on it the whole time he used it....that had to be it!...easy enough...i typed in his last 4 digits.....nope,nothing! incorrect code!!
He has had the same cricket number the whole time he used it...same number he has had,since2006... long before he upgraded to this one(the UTStarcom7126c)early last year.....when he upgraded to his new phone a few months ago... his number stayed the same.....he wasn't using it any more....so when my mine took a swim,i got it from him.....and i called cricket and transferred my number to it( few weeks back)....i tried to master clear it,to empty his phone book, before i started adding my numbers to it....it asked me for the code, i didn't have it, so...i just used it as is....But! i knew it had one....
Well earlier today.... i some how locked it! and none of the four solution's or lock codes i could find on here was workin for me....the only other thing i could find on here was ,short of dealin with cricket......was the post about using the software to unlock it......but for a fee,while online unlocking it through the internet......so i was lookin for the link and about to just pay to fix it! that is when i found the the key, missing link.....the part i was missing! or more like,had just been overlooking...
The key missing information.....
out of all the posts on here that all said the same thing.......finally! i found a post that explained it a little better, than,,,,its either 0000,1234,the last 4 digits or its PAY!
Well,was in the post (that i copied&added below ) i found out all the other were all right! except for the missing part....about the last 4 digits that will unlock it........changing to whatever the last for digits are of the new phone number is,whether was used phone on a different cricket account or even the same account & phone....if the # changes on a phone through the your service provider.....for what ever reason....the default last 4 digit lock code follows it,and changes to the last 4 of the new phone #
i had this happen also and i had my number changed then my cuzin locked my but my code changed to my new # try the last 4 numbers of the new number and try the hole number with out the area code..

UTStarcom... | Answered on Dec 13, 2010

cant get virgin phone off vibrate

UTStarcom... | Answered on Dec 02, 2010

Mine just did the same thing and it has done this to me on the last four blitz phones they have given me...my advice..get a new phone

UTStarcom Blitz... | Answered on Nov 16, 2010

For the unlock code for your mobile phones,
you can try this site http://www.mobile-unlocker.com/utstarcom/rs2wp8/
It provides the best instructions and easy methods for unlocking your mobile phones..........

UTStarcom Cell... | Answered on Nov 01, 2010

Hi.. visit to the given link for manual.. http://safemanuals.com/user-guide-instructions-owner-manual/UTSTARCOM/CDM7025-_E

...hope this has helped you,,., thanks..

UTStarcom... | Answered on Sep 30, 2010

Please take it to l a local repair pro.
We cannot help you on unlocking that unit coz that requires specific softwares and cables.

UTStarcom... | Answered on Sep 18, 2010


Since your phone is locked, it means you need to unlock the phone to be able to use it again. It is certain that you cannot unlock this phone for free, anywhere or on any site.

Some sites offer to unlock phones and charge some amount of money, but I won't recommend that for you because those unlock codes are not reliable.

I would advice that you take the phone to a phone tech within your area/vicinity, and your phone will be unlocked there within a couple of minutes. The phone code will be reset with with computer using a phone cable. I'm sure you do not have the facilities to unlock your phone that's why I'm referring you to a phone tech.

But if you want to unlock your phone online, you can visit this link: http://mobileunlocked.com/index.php

Lastly, you just have to try and remember the code you you will have to unlock it by paying some token.

Good luck.

UTStarcom... | Answered on Aug 19, 2010

How can I download songs(mp3) to my utstarcom cmd 7126?
Thanks, gem6can1

UTStarcom... | Answered on Aug 10, 2010

Hi, when a phone randomly freezes, it means that the phones memory is faulty or when an application you downloaded has virus.

What to do is this,

You will have to flash the phone to restore the memory of the phone.

You can use this link to see how to flash your phone.




Take care.

UTStarcom... | Answered on Aug 08, 2010

Base from the description of your problem this can be a settings problem, what you can do here is to reset or restore the phone to its default settings and once you have done that check if its now working, but if still the same problem a software update is need for this phone.

UTStarcom Blitz... | Answered on Aug 08, 2010

Mine unlocked using the last four digits of my phone number.

UTStarcom... | Answered on Jul 15, 2010

the batteries dead. you need a new one because after the battery dies it wont awknowledge the charger or battery. same thing happened to me. honestly this phone is a piece of ****. youre gonna have a lot more problems ttrust me. im having a problem with it now.

UTStarcom Blitz... | Answered on Jul 12, 2010

Usually a sign of moisture damage check the sensors on the battery and underneath the battery on the phone, if neither is red then you can get swapped out by the verizon store under warranty.

UTStarcom Blitz... | Answered on Jul 11, 2010

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top UTStarcom Experts


Level 3 Expert

8091 Answers

aliasger yq

Level 2 Expert

219 Answers

L Vincent Testa
L Vincent Testa

Level 3 Expert

721 Answers

Are you an UTStarcom Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides