Uniden Logo

Uniden Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 2K Products
  • 77K Answers
  • 2M Views

checked their website for a manual and that model number doesnt exist there... found this might help

https://smallbusiness.chron.com/program-frequencies-uniden-bearcat-scanner-49458.html

Uniden Radio... | Answered on Aug 12, 2020 | 21 views


how do you program a bc60xlt scanner, and how do you reset it i have tried 2,9 manual but nothing i have the battery out and see if that work but how long do i leave them out.thanks

Uniden BC60XLT-1... | Answered on Jul 05, 2020 | 3,212 views


I am having the EXACT same problem.

Uniden Radio... | Answered on May 30, 2020 | 2,998 views


Clear the Handset's Base Data
  1. To remove the base data from a handset when out of range of the base, press and hold the 'end' button and the '#' button simultaneously until the phone beeps.
  2. It will now be de-registered from the base.
Note: This requires that the base and handset can communicate with each other.


Clear the Base Handset Data
  1. To de-register all handsets from the base, remove power to the base, and remove the handset from the base.
  2. Press and hold the 'flash/find hs' button while applying power.
  3. Wait for the beep and release the button.
  4. The charge light will now flash.
  5. Sit any handset in the cradle.
  6. When the flashing stops, re-register the handsets to the base.
Re-Register a Handset to the Base
1. Remove Handset Battery.
2. Reconnect battery while holding down "*" and "#" key.
3. Then press the right upper key under the LCD.
4. Press the "End" key.
5. Wait a few seconds and then the phone will be ready to register to the base.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Uniden Lands... | Answered on May 25, 2020 | 719 views


Uniden TRU 8888Handset Reset (De-Register): 1. Remove Battery. 2. Reconnect battery while holding down "*" and "#" key. 3. Then press the right upper soft key under the LCD. 4. Press the "End" key. 5. Phone will be ready to register to the base.

Uniden Cordless... | Answered on May 25, 2020 | 7,046 views


TRY UNIDEN OR ASK GOOGLE

Uniden Lands... | Answered on May 19, 2020 | 54 views


Call the phone provider you are using, (verizon, att, etc.) they can help you to reset the password.

Uniden Lands... | Answered on Mar 27, 2020 | 98 views


Hello Lynn:

Make sure the power cord is securely plugged into the telephone base. Plug the telephone base into a different working electrical outlet not controlled by a wall switch. Move the handset closer to the telephone base. It may be out of range. Reset the telephone base by unplugging the electrical power to the base. Wait for 15 seconds and plug it back in again. Allow up to one minute for the cordless handset and the telephone base to synchronize. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Uniden Lands... | Answered on Mar 27, 2020 | 78 views


Uniden wxi477 out of range fix

This problem arises when the handset does not communicate with the base.
These are the steps:
1: Deregistering the handset
2: Registering the handset to base

Deregestering clears the stored (incorrect) base information on the handset.
Reregestering allows the base to assign a new ID for the handset.

Deregistering- press and hold the OFF (red button) and the # button on the handset for 5 seconds. select base unavailable and press OK. Are you sure appears. select yes and press OK. you will hear a confirmation tone. The handset will delete its own base information without trying to contact the base. It will now display MODELS VARY PLACE HANDSET ON THE BASE FOR REGISTRATION.

Registering the handset with the base- Make sure the tel. line and power is plugged into the base.
Press an hold the register button under the base (located between the tel. line and yellow power socket under the base) for 5 seconds until the red light flashes. At the same time press and hold the # button on the handset for 5 secs. You will hear a tone and It will now display REGISTRATION COMPLETE.

If it says registration failed: Retry the registration steps. Make sure the handset have enough battery power. If not charge for 15-20 hrs.
Check your connections on the base and make it is getting power.

The Steps above was my fix for the uniden wxi477 out of range problem.

Good luck.

Uniden TRU9585... | Answered on Apr 20, 2020 | 19,116 views


a non computer problem'
it is a CCTV system old and very cheap and poor grade.

tell what Bypass means, what it is and what do you expect.
IDK what you mean.
is the power button dead, is that it, if yes say that first.
I can not see what is wrong, must be told. ok?
lots of folks hate this system.

https://www.amazon.com/product-reviews/B00BIY0DFY/ref=acr_dp_hist_1?ie=UTF8&filterByStar=one_star&reviewerType=all_reviews#reviews-filter-bar

the device has a battery , and any toys with batteries, are bad.
1st things first is BATTERIES bad.


Id retire it and go Amcrest ( I have 4 web cams here and NVR server)
https://amcrest.com/

10000x better, for sure.
and not one battery in them,.

Uniden Computers... | Answered on Feb 13, 2020 | 57 views


Do not disturb or silent mode may have been enabled. Without the model number of your phone, I might miss one of the ways to re-enable ringing for your model. Make sure that the phone is in standby mode. Next, check if there is a DND button on the base for the cordless phone system. If the LED for the button is lit, press that button. You may need to hold the button; enabling Do Not Disturb requires a press and hold.

To disable silent mode, press and hold Silent on either the handset or the base. On the handsets, this may be the # key (below the 9). When you enable Silent Mode, you can get a prompt for how long you want the phone to be quiet. If you do not press any number key (other than 0), the Silent Mode will last until you disable it manually. You can then confirm the Silent Mode or it will be enabled after 5 seconds.

I hope this helps. In both modes, the answering system will automatically be turned on if it wasn't on before enabling the mode.

Cindy Wells

Uniden Lands... | Answered on Jan 30, 2020 | 85 views


depends where you are located.

Uniden Radio... | Answered on Jan 09, 2020 | 100 views


Thamizan Pulluvan junction
Channankari road
West Tamilnadu

Uniden Cordless... | Answered on Nov 29, 2019 | 363 views


Have you got the switch in correct position beneath the batteries ?

Uniden... | Answered on Nov 22, 2019 | 175 views


REPLACE IT WITH A NEW PHONE

Uniden Lands... | Answered on Nov 13, 2019 | 108 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Uniden Experts

Tom Chichester

Level 3 Expert

57285 Answers

ray gallant

Level 3 Expert

69178 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Are you an Uniden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...