Uniden Lands Phones - Page 2 - Recent Questions, Troubleshooting & Support

swap hand sets after the first is charged. use SSE07 accessory handset and charger that is included in original set. https://uniden.com.au/wp-content/uploads/2017/07/SSE_45_OM.pdf

Yes, it looks they are compatible. I would guess you need to set up from scratch. Remove all power to base unit and handsets, batteries to handsets, and phone line and start from the Base unit, to powering handsets again. https://www.google.com/search?q=DECT2060+base%2C+with+DCX170+handset ..

Unfortunately, the EXI5560 is not an expandable cordless telephone system. The base can only use the handset to which it was originally linked at the factory. Similarly, the DXA15588 handsets need to be paired to that base, not just to any Uniden cordless phone base. The first handset gets registered while it is charging in the main base. Charge the second handset fully in the charging base. Make sure not to use the phone for any incoming calls during the registration process. Take the first handset off the main base. You do not have to put this handset on the other charger and put second handset on the main base. Wait for the Charge/In Use LED to begin to flash. Wait at least another 5 seconds before removing the second handset from the main base. That's when you should be able to use the find HS button on the DXA15588-2 main base to get both handsets to beep. I hope this helps. You can find the manuals for these phones at the following sites: https://www.uniden.info/download/ompdf/EXI5560om.pdf and https://www.uniden.info/download/ompdf/DXAI5588-2om.pdf . Cindy Wells

That scanner has a battery level indicator that is active when the unit is on, it flashes when the battery is low and there is no key sequence to display any battery info in the manner you described.

DECT 5.0 is the range. The model number will be on the base or rear of the base station. Have a look at the videos https://www.google.com/search?q=uniden+dect+6.0+intercom+feature ..

You can switch to "night" mode on the console and the incoming calls should ring on the cordless. try it.

if you press talk what apperars on the screen of the handset that will not register?

Press "function", then 32. This will clear all alarms and error codes.

we consumers can not fix them , bin it and get a new unit

What model Uniden DECT 6.0 phone?

You have to register them all again. https://www.google.com/search?q=uniden+dect+6.0+register+handset ..

HOLA tengo un problema con mi base tiene un error el n?mero 4 no se d?nde o c?mo solucionar el peo la E4 no enciende eso paso desde un corte el?ctrico si alguien me puede ayudarme

I had the same problem. Something makes the phone's memory get "stuck."  Take the battery out of the phone for a minute and then put it back. Then unplug the phone and plug in again. You need to do this with all extensions. The problem goes away. 

Do you have the time adjustment set to Caller ID? If so, the time is being reset when your phone connects to the telephone company computer. To set this see the Advanced Setup options. Make sure that the phone system is in standby when you press the Menu/OK button to access the menu system. See page 17 of the manual for the information on the Advanced Setup options. The manual is available here: https://uniden.com.au/wp-content/uploads/2017/07/SSE_47_OM.pdf . I hope this helps. My guess is your telephone provider either hasn't updated their clocks or otherwise is giving faulty time information. Cindy Wells

Since you declined to specify the model of your Uniden DECT 6.0 phone, please select it from the list beginning at
http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl/
to download a manual.

If you can access the menu system, try Settings > Restore Options > Clear User Data > Full Reset. A quick step to do this, Press and hold 2, 9, and Dept when you power on the scanner. In the Clear User Data menu, there is also a Reset User Settings. This keeps the Favorites list. See page 31 of the user manual available at the Uniden support page: https://www.uniden.info/download/index.cfm?s=bcd436 . The current link to the English version of the manual is https://www.uniden.info/download/ompdf/BCD436HPom.pdf . I hope this helps. Cindy Wells

Xdect 8055 handset reset 1) Press and hold the hang up and # keys for at least 5 seconds. 2) Move the cursor to select Base Unavailable and then press Select. 3) Select the base you want to deregister from, press Select and then move the cursor to Yes and select. This causes the phone to delete any of its base information.

Like many phones, it sets the time upon receiving a call, and there is no other way to set the time. Until you receive the first call, the time will show incorrectly. (Also, the phone will not show the change to or from daylight saving time until it receives a call after the change.)

ASK GOOGLE

Unfortunately there is no simply delete all option So here's what you need to do , ( has uniden phone landline) Menu - down arrow - call blocking - menu key - view number - menu key - delete .. You'll need to do this for each number ... I haven't found a more easier way to do, I assigned a name to all the numbers like bogus 1 or scam 1 https://www.google.com/search?q=uniden+6.0+remove+blocked+contacts ..