How do i block incoming phone call from a uniden
Block an Incoming Call
1 Wait until your phone rings and displays the caller ID information 2 Press the "Block" button on your handset.3 Press "Menu/Select" or "Block" to confirm your decision.Block in Standby Mode
Press the "MENU" button on your phone's handset.
Press the down arrow button to
select "Call Blocking." Choose "Create New," "Private Number" (block
private calls) or "Unknown Number" (block unknown numbers) from the
Enter the 10-digit phone number, if creating a new entry. Otherwise, press the "Menu/Select" button to confirm your choice
on Jan 13, 2020
Reset my uniden ubc3500xlt
Scanner Reset: To initialize the scanner's memory, turn off the scanner. Then press 2, 9, and Hold while turning it on.
Important! This deletes all preprogrammed data. You cannot restore preprogrammed data that has been deleted.
on Nov 22, 2019
Hi whats the range on uniden atlantis 150
It all depends on the location. Being VHF and not using a repeater or external antenna, the range is likely less than 10 miles. Using a repeater you might get 50 miles or more. If you are thinking long range communications, you really need an HF transceiver. VHF is essentially for local communications.
on Nov 10, 2019
Red message light is blinking on my Uniden phone
Our just started to do the same thing. Drove us crazy because there were no messages. I couldn't find the manual so I looked up the manual on their website. Here's how to fix it....IT WORKS! With the phone in "stand by", open the menu and select Global Setup.Select VMWI reset. Then select yes.
Uniden 2.4 GHz...
on Nov 10, 2019
Record File Error on Guardian 2
I was getting the same trouble with the "record file error" always showing up on my monitor as well, and no recordings were being written into the SD card. I tried different SD cards and the same message was appearing. I was about to pack it up and return it to the store until I did one last thing...and it worked for me! Solution: Using a paper clip, insert the end of it into the "reset" hole under the SD slot and the system will turn off, restart, and voila!...it will start recording again. I hope this helps everyone who has this similar problem out there. I guess the unit just need a good reboot and get some of the bugs out of it's system.
on Oct 22, 2019
Not finding what you are looking for?