UC-Logic Recent Questions, Troubleshooting Help & Support

first you need the driver installed into your computer to make this work
download it off the webpage as listed below by clicking on the underlined text below
your unit should start to work as soon as this gets done downloading. you may have to reboot your computer as well first before trying it out

http://www.driverstart.com/start598642.html

yes, download any wizardpen driver from the following url, it works
http://www.nodevice.com/driver/company/Genius.html

good luck
www.she7ata.com

Found it here http://www.nodevice.com/driver/company/Genius.html . download any WizardPen or MousePen driver, it will work also
good luck
www.she7ata.com

Google for: PF1209 Mac driver (you may add UC-Logic, Genius, Pentagram, Trust)  and find the OLDEST available driver. It should be a .pkg file after extracting. 
Install it (it should be the v.1.0 control panel) and then you may install the recent v.1.24.2 driver over it. 
It is still a bad written chinese PPC code conflicting with some applications but it works in the meantime. 
 While the whole planet slides down on the windoze-skit  - I'm waiting for a real Mac driver too ;o)

Change to Linux, Mac OS or some UNIX OS !

Hi. What driver are you trying to install?

change the file extension of the setupext file in the first directory of the driver setup to .inf that should fix your problem

hi there

you need to look for the lates drivers for that tablet. vista wouldnt properly recognize that as a tablet if you use the driver that came with that. search your manufacturers site for driver updates for your tablet.

hi there, you may have a faulty sensor or a loose wire on your tablet. this is the usual cause for tablets to malfunction and eventually die. so my advice to you, if its still under warranty, have it replaced. hope this helps you. ... fixya!!!

Try this: http://www.uc-logic.com/download/download_driver.htm Hope that helps :)