U.S. Robotics Computers & Internet - Page 6 - Recent Questions, Troubleshooting & Support

The Installation Guide is here. I haven't been able to locate any other manual. There may not be one in print; most products come with just some quick setup information and the full manual is included on the CD along with drivers and other software.

rage rt505

can you please give me more details about the kind of modem you got!! it would be easier for me to help you out!!

I HAVE WINDOWS SERVER 2003 SYSTEM THAT NOT INSTAL MODEM DRIVER. I WANT TO DOWNLOAD DRIVER SOFTWARE

The easiest way to release and renew your IP with a router that doesn't have that feature is to unplug the modem (not the router) for a few minutes - overnight while your sleeping to be sure.

You can change password with below method.Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

USR has two versions of the software for that unit.
*note the page is mostly in Spanish*

There is Driver Version 3.3.36.0 and an archive version below...
I hope this is a help:

http://www.usr-emea.com/support/s-prod-template.asp?loc=span&prod=5422

Not logging into the router could be due to the IP address to log into it change after resetting the router. As for the wifi not working make sue that the deices are using the correct security settings. Remember older devices are not compatible with WPA and uses WEP.

Try to get to the Hp ..and download and install the driver for the printer into the windows 7 ...cause this may be the cause for what it isnt seen by the pc ..specially if they are in network ...the others seen it cause they have the xp driver ..but for this one you have to load the w 7 driver..
Also try to make the settings again if this is the only pc connected to the router ..
or ..if the driver is installed ..get to start ..printer and faxes..and run the add new printer wizard ..and look for the printer by name in the network ..(after you install the driver..

your gateway is whatever the router's ip address is (ie, 192.168.254.1)

Avoid downloading more files..
Dont have more icons in your desktop.
Then clear cookies & private data ..
Follow this & check the speed of the internet in this site http://www.ip-details.com/internet-speed-test/
You can find the difference & it will increase your speed ..

normally it's 1234 on default. if you got it from your provider, you should contact them.

It's most likely easier for you to just reset the router.
There's probably a reset button on the back of the router that will allow you to default the network settings, removing the unknown wireless key.

You should use the D-Link router for your port forwarding.

From what you described the US-Robotics 9107 is being used for your internet gateway and your using your D-Link for your router functions. Because the D-Link is being used for the router fuctions it should also be used to forward ports.

I hope this helps! Thank you for using FixYa!

you can find the proper software for your computer at the link below:
http://www.usr.com/support/product-template.asp?prod=9601a

On the back of the router there is a reset button or a pin-hole. Hold that in for 8 seconds and that will reset all your wifi settings to default. At that point there will be no password and it can be setup like new.

Hi gulzar_ah228,

If you wanted to insert any other operator sim card on your Micromax MMX 610U Airtel USB datacard you really need to unlock it. If you wanted to unlock the modem you will be needing a Software and guide to do the process. Please see the steps below on how to unlock Micromax MMX 610U USB Datacard:

1. First download the software here:
Universal Master Code Generator

2. After downloading install the software. Now you need to remove the Airtel SIM card from the modem.

3. Insert a different Operator Sim card.

4. Open the Universal Master Code Generator.

5. Please enter the Micromax MMX 610U IMEI number. You can locate the number on the card.

6. Once you already entered the security code, press calculate. On the left side you will get 2 codes the unlock code and flash code.

7. Connect the modem to your PC, wait until a screen pops up, it will requires you to enter the unlock code.
--> please use the unlock code that was generated in step 6.

Hope it helps.

Thank you for using FixYa.

http://www.microsoft.com/Windows/compatibility/windows-vista/Details.aspx?type=Hardware&p=USR8054+802.11g+54Mbps+Wireless+Turbo+Router&v=USRobotics&uid=USR8054&pf=0&pi=1&c=Networking&sc=Wireless+Routers&os=64-bit