Tylo Hardware & Accessories - Page 7 - Recent Questions, Troubleshooting & Support
Orbit 6 station Water Timer model #57976
I need someone to talk me through programming my orbit 6 zone sprinkler system ASAP can you call me and not charge me and talk me through it? My no is 4356333446
Need instructions for a Timex Timer Moder #TE111 (TX12694TA)
To set the timehold down the TIM button until Day flashes, Use +/- to adjust then hold down time until hour flashes..Repeat until set.
To program,
1. hold down prog until the cursor starts to flash at 12:00
2. Press PROG to advance to the day or day group you want to program.
3. press + to advance the cursor to the desired ON time
4. press mode until display reads "on"
5. use the + to move the cursor to the desired ON duration? Clock shows this also.
6. press mode until "off" is displayed. then advance the cursor thru the period the outlet should be off. (stupid to have to do this!)
7. press MODE to select as the ON or OFF period(!)
8. press TIME to exit programming.
9. Press PROG again to program another set of days.
Stupid system.
Good luck.
Dave
Intermatic pf1102t will not turn pool pump on and off
Hi all. I have the same problem with PF1102.
It was working and turn the pump on and off, but it suddenly stopped doing it.
That means the wiring is correct.
Also, the timer (clock) is moving and show the correct time.
I have to manually turn on and off the whole system to run it for couple of hours.
I think I just need to replace the timer part.
Please advise.
Not finding what you are looking for?