TurboChef Ovens - Recent Questions, Troubleshooting & Support


there is a high limit reset button on the back of the oven .reach around left side if you are facing oven. if that is it but it trips again you have other issues. if that is not it you have other issues possibly k4 k5 ssr or element problems

TurboChef... | Answered on Oct 27, 2020


When you load the program the gold seal faces you, if you have the code it should unless the card is corrupt

TurboChef Ovens | Answered on Mar 02, 2019


check pad connections if all good you need new pad

TurboChef... | Answered on Nov 26, 2018


Its a big pain in the *** issue.
IF YOU KNOW HOW TO USE CLAMP AMMETER THEN ONLY YOU CAN USE MY METHOD TO TROUBLESHOOT IT.
MAKE SURE OVEN HAS 5000V IN THE CAPACITOR.DISCHARGE THEM FIRST .
AND IF YOU DON'T KNOW THEN STOP HERE
STEPS
1. open right side pannel
2. press back key to turn off oven
3. press back and enter key simultaneously.
4. enter 9428 then press enter.You are directed to testmode.
5.put clamp ammeter on the primary wire(orange in color).The one which come from top and looping the IO board.
6.Under Displaty screen you see Word Magnetron.Press and hold the soft key to energize the magnetron.
7.Check the amperage.It should be under 14-16 Amps.
8.If its half of the value or nothing comes then.
9 half value means(one magnetron is working
10. No value means F3 fuse blown and check the cause why it blown(physically look at the transformers and the capacitors and the diodes that they didn't burnt or change their shape.
IF YES THEN REPLACE IT.

OKAY LET ME KNOW IF YOU CAN REACH UPTO HERE .
AND REPLY ME
THNAKS
PLEASE RATE MY WORK

TurboChef... | Answered on May 18, 2018


your mags failed replace 20 amp fuse and figure out cause probaly bad mags or transformers.

TurboChef... | Answered on Nov 24, 2016


That typically means the microwave circuit is not powering on so the oven turns itself off. Most of the time when that happens you will get an error code flashing on the bottom of the screen. If F3 MAG CURR. Look at my previous answers on fixing that

TurboChef C3... | Answered on Nov 24, 2016


What is your amp draw? You could just have a bad I/O board.

TurboChef... | Answered on Oct 06, 2016


replace 3 door switches, very cheap fix. bout $2.50 per switch and all you need is a screwdriver.

TurboChef... | Answered on Sep 22, 2016


If transformer is looking burnt then replace it . It will show you F3 code once the transformer is. Totally burn. Tell me if you need help . I am tech for turbochef

TurboChef... | Answered on Mar 24, 2016

Not finding what you are looking for?
TurboChef Logo

254 questions posted

Ask a Question

Usually answered in minutes!

Top TurboChef Ovens Experts

Brad Brown

Level 3 Expert

18522 Answers

Dennis Boxerman

Level 3 Expert

1305 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34986 Answers

Are you a TurboChef Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...