Toymax Televison & Video - Answered Questions & Fixed Issues

0helpful
1answer

I need remote code for skyworth sltv2663a tv to

Skyworth directv remote code is 11256
10/6/2020 10:47:13 PM • Toymax Skyworth... • Answered on Oct 06, 2020 • 205 views
0helpful
1answer

Need to know value of component in spot 6079 on power supply?

What is the part number on the board itself?
1/31/2018 8:30:50 PM • Toymax Magnavox... • Answered on Jan 31, 2018 • 165 views
0helpful
1answer

TV is slow to start up. Green light blinks for a long time.

take it to mechanic,because it not repair by a common man at home..
1/4/2018 7:29:30 AM • Toymax Magnavox... • Answered on Jan 04, 2018 • 103 views
0helpful
2answers

Hi , was watching my 42 inch VIORE Plasma TV last

Check high voltage circuit. This is near where the 120 volt cord is plugged in and a high voltage transformer, where there should be capacitor (or two). Check the voltage - should be 390 to 400 volts. If not less than 390, near to replace the capacitor.
12/23/2017 2:12:42 AM • Toymax Viore 42... • Answered on Dec 23, 2017 • 204 views
0helpful
1answer

TV will not power on.

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
12/6/2017 11:53:47 AM • Toymax Magnavox... • Answered on Dec 06, 2017 • 93 views
0helpful
1answer

Magnavox 37MF231d/37 LCD TV cycling thru colors

Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
12/6/2017 11:43:57 AM • Toymax Magnavox... • Answered on Dec 06, 2017 • 247 views
0helpful
1answer

Can't connect to Internet on my Magnavox 47mf437b/47

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
6/11/2016 7:22:35 PM • Toymax Magnavox... • Answered on Jun 11, 2016 • 37 views
0helpful
1answer

Model#pdp42v18ha power on black screen indicator light works cuts off in 5 seconds

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
3/3/2016 6:47:37 PM • Toymax Viore 42... • Answered on Mar 03, 2016 • 71 views
0helpful
2answers

I have a Magnavox 37MF32id137 we turned the tv off

You have a bad Capacitor. Look for a bulge on this cap. Location is 2074 and it is a 25volt 2200MF cap gone bad! And there may be another very close by that may also need replaced...you will see it ,and is bulged or skinned
1/24/2016 9:26:03 PM • Toymax Magnavox... • Answered on Jan 24, 2016 • 894 views
0helpful
2answers

Magnavox 37mf231d will not turn on, only have steady flashing led light-continuous

I just fixed mine that had a very similar symptom to this and it was a bad part on the main board. I made a video showing what part and how to replace it. I also added a link below to the part I ordered. L5973D STMicroelectronics Mouser
1/24/2016 9:17:35 PM • Toymax Magnavox... • Answered on Jan 24, 2016 • 204 views
0helpful
1answer

TV turns on in the middle of the night

  1. If the TV has a timer option, ensure it is disabled.
  2. Check the remote control to see if any of the buttons are stuck that may be interfering with the TV.
  3. Unplug the power cord of the TV from the AC wall outlet for 60 seconds.
  4. Plug the power cord back into the AC outlet.
  5. Attempt to turn on the TV.
  6. Remove all remote controls from the room where the TV is located.
OR unplug all HDMI sources to see if a device is sending signals in the middle of the night
11/12/2015 10:39:22 PM • Toymax Magnavox... • Answered on Nov 12, 2015 • 93 views
0helpful
1answer

Viore 37" LCD- Green Tint...no TINT setting available to change

change the main board
10/19/2015 2:08:06 PM • Toymax Viore 42... • Answered on Oct 19, 2015 • 546 views
0helpful
1answer

How to fix my magnavox LCD tv, the picture went out, have sound

Hi Daryl, This is a common problem with LCD TVs. Back light failure is the cause in most of the cases. I do not think you can do anything about it yourself. Please consult a local TV tech. Good Luck
5/22/2015 5:09:48 AM • Toymax Magnavox... • Answered on May 22, 2015 • 86 views
0helpful
1answer

Why toymax magnavox 37mf331d 37 in tv worked good i turned it off came back to turn it on and it wont come on the green light that is usually there its not on ?

Fault with the main power supply regulator section. Either it will be on a separate board, or on the part of its main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/
11/27/2014 2:48:17 AM • Toymax Magnavox... • Answered on Nov 27, 2014 • 113 views
0helpful
1answer

My magnavox tv worked good turn it off later tryed to turn it on and it wont i notice the green light on the power button wasn't on

Fault with the main power supply regulator section. Either it will be on a separate board, or on the part of its main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
11/27/2014 2:38:18 AM • Toymax Magnavox... • Answered on Nov 27, 2014 • 63 views
0helpful
2answers

HOW DO I RESET MY TV. IS THERE A RESET BOTTON ON THE TV; 32MD3578

manual. walk thrue the the maual and with you temote, and then fabricreset, are you a mongole or so , reading is hard
11/2/2014 4:44:27 AM • Toymax Magnavox... • Answered on Nov 02, 2014 • 193 views
0helpful
1answer

Viore tv with no signal when hooked up to cable? I

I brought a viore from a yard sale and now I can not seem to set it from cable to antenna what can i do
9/15/2014 10:20:59 AM • Toymax Viore 42... • Answered on Sep 15, 2014 • 1,113 views
0helpful
1answer

My magnavox is power cycling with picture and sound but there is an audible pop then it restarts

Fault with main board. Damaged component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
9/3/2014 3:29:03 AM • Toymax Magnavox... • Answered on Sep 03, 2014 • 60 views
0helpful
1answer

On my Magnavox 37mf231d tv when I turn it on, the backlights turn on for about 3-4 seconds, then turns off. There is no blinking green light, there is no green light at all. It seems like it is trying

Fault with main board. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/
8/24/2014 5:34:31 AM • Toymax Magnavox... • Answered on Aug 24, 2014 • 121 views
0helpful
1answer

The master lcd inverter bd. has a red led that goes out after few seconds

Hello, that set has a pair of inverter boards (back light boards) that usually are the cause, you may want to look for bad connections on the transformers and check the little white fuses to be sure their good. But these sets are getting old enough that I've seen the florescent tubes in the display go bad and cause the set to go into shutdown. If you want to try the bak light boards, I found these on E-bay for $20......thanks2f196b76-eae3-4989-b91a-2bf4ff61cb82.jpg
8/14/2014 9:37:00 AM • Toymax Magnavox... • Answered on Aug 14, 2014 • 58 views
Not finding what you are looking for?
Toymax Logo

Ask a Question

Usually answered in minutes!

Top Toymax Televison & Video Experts

Ekse

Level 3 Expert

13435 Answers

The Knight
The Knight

Level 3 Expert

76823 Answers

Tom Chichester

Level 3 Expert

62196 Answers

Are you a Toymax Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...