Toymax Televison & Video - Recent Questions, Troubleshooting & Support

0helpful
1answer

I need remote code for skyworth sltv2663a tv to

Skyworth directv remote code is 11256
10/6/2020 10:47:13 PM • Toymax Skyworth... • Answered on Oct 06, 2020
0helpful
1answer

Need to know value of component in spot 6079 on power supply?

What is the part number on the board itself?
1/31/2018 8:30:50 PM • Toymax Magnavox... • Answered on Jan 31, 2018
0helpful
1answer

TV is slow to start up. Green light blinks for a long time.

take it to mechanic,because it not repair by a common man at home..
1/4/2018 7:29:30 AM • Toymax Magnavox... • Answered on Jan 04, 2018
0helpful
2answers

Hi , was watching my 42 inch VIORE Plasma TV last

Check high voltage circuit. This is near where the 120 volt cord is plugged in and a high voltage transformer, where there should be capacitor (or two). Check the voltage - should be 390 to 400 volts. If not less than 390, near to replace the capacitor.
12/23/2017 2:12:42 AM • Toymax Viore 42... • Answered on Dec 23, 2017
0helpful
1answer

TV will not power on.

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
12/6/2017 11:53:47 AM • Toymax Magnavox... • Answered on Dec 06, 2017
0helpful
1answer

Magnavox 37MF231d/37 LCD TV cycling thru colors

Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
12/6/2017 11:43:57 AM • Toymax Magnavox... • Answered on Dec 06, 2017
0answers
0answers
0helpful
1answer

Can't connect to Internet on my Magnavox 47mf437b/47

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
6/11/2016 7:22:35 PM • Toymax Magnavox... • Answered on Jun 11, 2016
0helpful
1answer

Model#pdp42v18ha power on black screen indicator light works cuts off in 5 seconds

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
3/3/2016 6:47:37 PM • Toymax Viore 42... • Answered on Mar 03, 2016
0helpful
2answers

I have a Magnavox 37MF32id137 we turned the tv off

You have a bad Capacitor. Look for a bulge on this cap. Location is 2074 and it is a 25volt 2200MF cap gone bad! And there may be another very close by that may also need replaced...you will see it ,and is bulged or skinned
1/24/2016 9:26:03 PM • Toymax Magnavox... • Answered on Jan 24, 2016
0helpful
2answers

LCD TV Magnavox Turned it on & no screen, just

the power module is shot ,the same as mine was.. Cost me 285 to fix and now the color is gone.. Magnavox is junk.. scrap it and buy a Sony or Samsung..tom dwyre
1/24/2016 9:21:53 PM • Toymax Magnavox... • Answered on Jan 24, 2016
0helpful
2answers

Magnavox 37mf231d will not turn on, only have steady flashing led light-continuous

I just fixed mine that had a very similar symptom to this and it was a bad part on the main board. I made a video showing what part and how to replace it. I also added a link below to the part I ordered. L5973D STMicroelectronics Mouser
1/24/2016 9:17:35 PM • Toymax Magnavox... • Answered on Jan 24, 2016
0helpful
2answers

Have a Magnavox 37mf321d LCD TV, one day, went to

Although a capacitor may look good, it may be weak or bad. Here is what you will have to do. Replace capacitor (location) 2074 which is a 25 volt 2200Mf at 105 degrees. Replace capacitor (location) 2081 which is a 35 volt 1200 Mf at 105 degrees. And you should change capacitor 2066 which is a 16 volt 10Mf at 105 degrees. Please be careful with the last cap mentioned. You can easily tear the PCB trace if you are not extremely careful. This should bring your TV back to life. Thanks for asking and show a few hands of support!
1/24/2016 9:13:52 PM • Toymax Magnavox... • Answered on Jan 24, 2016
Not finding what you are looking for?
Toymax Logo

238 questions posted

Ask a Question

Usually answered in minutes!

Top Toymax Televison & Video Experts

Ekse

Level 3 Expert

13435 Answers

The Knight
The Knight

Level 3 Expert

76758 Answers

Tom Chichester

Level 3 Expert

62168 Answers

Are you a Toymax Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...