Toshiba Satellite - Popular Questions, Answers, Tips & Manuals - Page 6

hi Mike. this is all i could find. Try the following... 1. Power off the laptop. 2. Power on the laptop. 3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off. 4. Repeat this process a few times until you see the "Preparing Automatic Repair" screen. 5. Now you want to let the laptop boot to the "Automatic Repair" screen. 6. Click "Advanced Options" and then select "Troubleshoot". 7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system. 8. From here just follow the screen instructions until the recovery is completed. NOTE: You will need to get into the "Advanced Options" in order to get the "Refresh Option". This choice will keep your data, but any programs installed will be lost. Do not do a "Reset" as that will wipe all data you have on the laptop. .. or go to this link and read up in the forum might help. My laptop keeps restarting and installing windows how do fix this if that does not help you go to this link. Toshiba Satellite L655 S5096 Notebook Computer restarted during restore...

sound like you need to replace the power pack.

It would have to be a hardware failure but you could try reinstall of main board driver if you can find them

Ran into this 1 before a few times on the 600 series Cs, once was a driver issue from a virus left unrepaired and the second time was a bios error which required me to obtain the bios update and reflash the bios, not an easy project at all, but watch the youtube how to videos and im sure you could handle it :).

What is the source of the signal? WiFi or hard wired.

let it be checked by technician

start the computer and at the same time keep the delete button depressed until the bios screen comes up in one of the tabs you will find format the hard drive do that then go to oot tab and change boot sequence from hard drive to cd as first preference open the cd and insert the disc close down the computer then restart and it will boot from the cd

Might need a new sound card but first, Have you done the following.... 1. Go to "Control Panel". 2. Click on "Sound". 3. Make sure you are on the "Playback" tab. 4. Click on the device you are trying to fix. 5. Now click the "Configure" button and follow the prompts. (Be sure you also click the "Test" button.) 6. Once that is complete, click the "Properties" button. 7. When you are done with your changes, in "Properties", click "Apply" and then "OK". 8. Then click "OK", again, on the main "Sound window".

hi Debbie. It can be anything. Hardware failure. Windows Vista becoming unstable.windows 7. The best thing to do is immediately backup your important data. If it is a software issue, then it would be difficult to determine what the cause could be. Did you recently install any software? Or have you shut off your laptop without allowing Windows to properly turn itself off? A clean install of Windows Vista or 7 is probably the best option to take if you are not going to bring your laptop to a repair center. If after a clean install you still have BSOD (blue screen of *****), then that would point to a hardware issue. At that point you will need to bring it into a repair center you could alternatively disable the automatic restart on critical error so you have time to read what the BSOD says. you can then google the error codes to give you an idea of what caused the error. Do a complete factory reset using a System disc instead or a USB bootable disc that has the operating system burned into it that might do the trick with your case Try this and see if you can get it to fix.... Note: If this problem started after an update, please make sure the laptop is not connected to the internet in any way before you use the following instructions. 1. Power off the laptop. 2. Power on the laptop. 3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off. 4. Repeat this process a few times until you see the "Preparing Automatic Repair" screen. 5. Now you want to let the laptop boot to the "Automatic Repair" screen. 6. Click "Advanced Options" and then select "Troubleshoot". 7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system. 8. From here just follow the screen instructions until the recovery is completed. NOTE: You will need to get into the "Advanced Options" in order to get the "Refresh Option". This choice will keep your data, but any programs installed will be lost. Do not do a "Reset" as that will wipe all data you have on the laptop. Toshiba satellite az00 ah5 blue screen Google Search and go to this link to read up on hard drive noise. What To Do When Your Hard Drive is Making Noise or this. https://support.wdc.com/knowledgebase/answer.aspx?ID=568

I am not sure what you mean about power point. If you are speaking about the power jack and the plug in the laptop then you can replace those relatively easy. Just order one. On the other hand if it is mounted to the board inside then it is not easy. Also I find that the power jack to the power unit tends to fail now more often than the plug.

You could try using compressed air to clear out the fan, but most likely your system is overheating and the longer you go without fixing it the worse and more permanent issues it will cause

We have no way to access that type of cross over information.

Pictures may show how: http://www.irisvista.com/tech/laptops/toshiba-satellite-a205/laptop-disassembly-1.htm Also, search using https://www.google.com with the search term disassembly and look at youtube videos on how to disassemble.

If the computer powers on when the adapter is plugged in, but showing no charge, there's a very good chance your battery has reached the end of it's life. Replacement batteries can be found though via google searching the part number generally written on the battery itself.

probably a bad hard drive take it to as it repair shop for a diagnosis

see if this link helps you out. hard drive runs constantly Google Search

Intel Wireless LAN Driver for Windows 7 (32) Posted Date: 2016-09-21 ' Version: 12.4.1.11.0 ' Size: 4.43M Atheros Wireless LAN Driver for Windows 7 (32/64) Posted Date: 2016-09-21 ' Version: 1.0.0.196.0 ' Size: 21.82M Atheros Wireless LAN Driver for Windows 7 (32/64) Posted Date: 2016-09-21 ' Version: 8.0.0.144.1 ' Size: 21.79M Realtek LAN Driver for Windows 7 (32/64) Posted Date: 2016-09-21 ' Version: 7.003.0522.2009 ' Size: 7.26M pls remove the back cover and check wireless card label and download the correct driver.

Remove batter, unplug adapter, hold the on/off switch in for about 20 30 seconds. re-install battery and plug in and try to turn on, see if it comes on. good luck

1- use only one finger 2- be sure that it have its original driver file (reinstal the driver from the toshiba site) 3 - if u put your hands on its pad if there is more much heat iam sorry it seems to be want to say good bey

start the PC in safe mode (f8 on boot) and see if it still freezes. If not do the system scan from within safe mode