Toro Garden - Page 6 - Recent Questions, Troubleshooting & Support


it really depends on the model as to how easy it is to get to the recoil starter mechanism

Toro Garden | Answered on Feb 08, 2019


The parts diagrams online show some little parts in the drive train, thrust washers and idler/drivers. Are all those parts accounted for and in place? Is the polarity on the motor turning it the proper direction? Hope you can run it with a cover open to see what is happening or not happening. Can you turn the paddles by hand and the motor turns with it?


https://www.partstree.com/parts/toro/snow-blowers-snow-throwers/38025-1800-toro-1800-power-curve-snowthrower-sn-310000001-310999999-2010/housing-and-rotor-assembly/

Toro Garden | Answered on Feb 06, 2019


carb is dirty

Toro Garden | Answered on Feb 01, 2019


CHECK WITH TORO DEALER .

Toro Garden | Answered on Feb 01, 2019


Request the diagram directly from Toro.

Toro Garden | Answered on Jan 28, 2019


Google (toro)(6.75)(manual) without parens.

Toro Garden | Answered on Jan 26, 2019


The operating manual I checked said not to mix oil and gasoline. I would suggest you check your manual. It also said not to use gasoline with alcohol.

Toro Garden | Answered on Jan 22, 2019


fuel filter, fuel line, more than likely it is still the carb. there are very small holes that have to be cleaned good or it will do as you have said. clean again with carb cleaner and a small wire. blow out with compressed air. should run like new again.

Toro Garden | Answered on Jan 21, 2019


Usually 2 cycle engines are 5 to 1 - parts of fuel to oil. Check for an online copy of the manual to know for sure.

Toro Garden | Answered on Jan 18, 2019


slipping belts? old belts?

Toro Garden | Answered on Jan 06, 2019


NOT DIRECTLY WITHOUT MODIFICATION OF MOUNTS

Toro Garden | Answered on Dec 19, 2018


The main jet of your carb is clogged and you need to open carb and clear the obstruction - spray carb cleaner on the bolt that holds the gas container to bottom of carb - also spray all the innards along with any tube that protrudes into the gas can.

Then using air compressor blow the sucker out and reassemble. That should do it.

Toro Garden | Answered on Dec 11, 2018

Not finding what you are looking for?
Toro Logo

5,092 questions posted

Ask a Question

Usually answered in minutes!

Top Toro Garden Experts

Joseph Mueller
Joseph Mueller

Level 2 Expert

346 Answers

roeb

Level 3 Expert

819 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Toro Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...