Topcon Electronics - Others - Recent Questions, Troubleshooting & Support
No power
It could be a few things.
1. Bad keypad / power button ($30.00 and labor)
2. The power connection is lose from the main board.
3. Corrosion on the rear battery terminal.
4. Lose connection / Battery Springs
5. Bad Main Board.
Most of the time when a laser will not power on, it is a battery connection issue. You can carefully open it and inspect the wiring (red and black cable that goes to the green main board)
If the only problem is that it wont power on I'd be willing to bet it's repairable. Those units are notorious for not holding calibration. If you drop one chances are it may no longer hold calibration due to a bad compensator.
Any laser dealer with a service center should be able to pop that thing open and fix it pretty quickly
If you don't want to pay to have it repaired, open it and check the connections. Be careful not to touch anything unless you have an esd wrist strap, or you could damage the main board. At this point it's already broken so there is no harm in trying.
How to cold boot my Ranger data collector
take the battery out, screw it back in, then power on. if it still doesn't cut on, charge the battery up. remember to set the time and date after taking the battery out.
Nsm performer classic
If your NSM Performer Classic jukebox is not accepting money and playing music, there could be a few different issues that could be causing this problem. Here are a few things you can try:
- Check the coin mechanism: Make sure the coin mechanism is clean and in good working order, and that the coin chute is not blocked.
- Check the bill acceptor: Make sure the bill acceptor is clean and in good working order, and that the bill path is not blocked.
- Check the credit display: Make sure the credit display is working properly and that it is displaying the correct amount of credits.
- Check the software: Make sure the software on the jukebox is up to date and that there are no errors.
- Check the selection buttons: Make sure the selection buttons are working properly and that the jukebox is able to receive selection inputs
- Check the amplifier and speaker: Make sure the amplifier and speaker are working properly and that the jukebox is producing sound.
If none of these steps resolves the issue, it is possible that the jukebox may be defective and require repair or replacement. In that case, contact NSM customer support for further assistance.
How to delete all in my sony ericsson x10i
To delete all data from your Sony Ericsson X10i, you can perform a factory reset. Here are the steps to do this:
- On the home screen, tap the "Menu" button.
- Scroll down and tap "Settings."
- Scroll down and tap "Privacy."
- Tap "Factory data reset."
- Tap "Reset phone."
- Confirm that you want to delete all data by tapping "Erase everything."
Please note that this will permanently delete all data, including contacts, messages, apps, and settings. It's also a good idea to back up your data before performing a factory reset.
Not finding what you are looking for?
