Timex Ironman - Answered Questions & Fixed Issues
Timex Ironman Run Trainer 1.0 won't charge
Just fixed mine. While plugged in, depress all the buttons simultaneously for 3 seconds. It should turn on and show that it is charging. The ticking will stop as well.
Indigo light doesn't work
It is possible that either that the movement of the watch is not aligned properly after a battery replacement.
4/29/2020 12:23:39 PM •
Timex T5K018...
•
Answered
on Apr 29, 2020
•
3,252 views
I have an Ironman GPS trainer, and the date and
Hello bzgoodsbl,
When I encounter a product such as your
Timex 5E681... Knowing absolutely nothing
about modern TIMEX or ...
But being an ACCOMPLISHED amateur horologist
(clock, watch, licensed radioman and admirer of John Harrison)...
https://en.wikipedia.org/wiki/John_Harrison
>> I looked your "IRONMAN" up...
- inexpensive (Amazon)
- Very Popular 4/5 STARs
- Easy to read instructions
Just my own observation here:
Before I would hand any TIMEPIECE I ever
cared about... over to some PIZZA-FACED
**** at the corner **** store...
I would seriously consider spending a few dollarson some WATHMAKERS tools and opening
the device myself...
As soon as AN UNAUTHORIZED person opens
your "IRONMAN" the warranty is VOID.
Just know your options.
NEW = Send it back (do it now).
https://www.timex.com/returns-exchanges.html
Strap broken on timex heart
Hi, Almost any large dealer like Wal-Mart, Sears, or Target will have Timex replacement straps and bands for most popular watches and monitors. Sometimes a local Authorized Dealer will have specialized products that the department stores don't even carry without ordering.
I have had good luck with Wal-Mart on watch accessories. I've also ordered straight from Timex in Little Rock, Arkansas, ph. 1-800-448-4639, but it usually takes more time for just parts.
Thanks, Bill
How do I unhide alarms 2 and 3?
Set multiple alarms. If any alarm is active,(picture of alarm hear) appears in time display A. Press MODE repeatedly until ALARM appears, followed by ALM1. Press STOP/RESET to select Alarm to set. B. Press SET/RECALL to set alarm. HOURS digits will flash. Press +/- to change HOURS. C. Press NEXT and +/- to set MINUTES, AM or PM (if primary time display is in 12-hour format), DAILY, WKDAYS, WKENDS, or day of the week (weekly alarm). D. Press DONE to exit. E. Press +/- to set different Alarm. Set as above. F. In Alarm mode, press START/SPLIT to turn Alarm ON or OFF. TIP: Alarms apply to selected Time Zone of watch display. Backup Alarm sounds after 5 minutes if no button is pressed. Turning off any Alarm or backup will not affect other alarms.
http://assets.timex.com/user_guides/W191_M131/W191_M131_NA_EN.pdf
12/1/2015 3:16:59 AM •
Timex Sports...
•
Answered
on Dec 01, 2015
•
1,373 views
Need to set just the time on a timex WR100M mens watch
SETTING
- First, find the regular time mode by pressing the MODE button until the time (with the date at the top) shows.
- Press & hold the SET button until the word ENTER disappears and is replaced by the word TIME. Release that button. You'll notice that at the top of the display, the words SET T1 or SET - T2. This is where you select between setting the 1st time zone or the 2nd time zone. Select between T1 or T2 by pressing the RECALL button or the STOP/RESET button.
- Press either the MODE or the START/SPLIT button. You'll notice that whatever is blinking is what you can change. You can make the changes by pressing either the RECALL or the STOP/RESET button. You can change the Seconds, the Hours, the Minutes, the Month, the Date, the Year, and choose between 12 hour (civilian) or 24 hour (military) time. If you keep MODE or START/SPLIT button, you will go through all the things you can change and start again at the beginning. The START/SPLIT button goes through these things forward, and the MODE goes through the backwards, so if you pass something and want to back up, just switch buttons. In the same way, the RECALL changes things by making them larger, and STOP/RESET changes them by making them smaller, so if you accidentally pass the number you're trying to set it to, just switch to the other button and go back.
EXAMPLE OF SETTING THE WATCH
Suppose you want to set the hours and the date in the 2nd Time Zone. (Just as an example, but setting any other time or date settings would be the same.)
- Press the lower left button on the side (MODE) until you see the date & time.
- Press & hold the lower right button on the side (SET) until the word TIME appears on the display, then release it.
- If SET T1 is showing, then press & release the upper right button on the side (RECALL) to change it to T2 (because we're wanting to set the 2nd Time Zone we'd leave this unchanged if we wanted to set the 1st time zone, T1.)
- Press & release the lower right button on the face (START/SPLIT) twice, skipping the seconds. You should see the hours flashing.
- Press & release the upper right button on the side (RECALL) repeatedly until you have the hours position set to what you want it to be. If you pass the hour you want, go to the lower left button on the face (STOP/RESET) and press & release it to back up.
- Press & release the lower right button on the face (START/SPLIT) three times, skipping minutes and months, so that the date begins flashing. Press the RECALL button until you have the date you want. (You can go backwards by pressing the STOP/RESET.)
- When you're done, and you've set everything you want to, press & release the SET button once to tell the watch you're through setting and to lock those settings in.
11/23/2015 6:15:52 AM •
Timex Ironman...
•
Answered
on Nov 23, 2015
•
2,376 views
Where are the two AC pads and how do I short them?
Oftentimes they will just look like brass contacts on the printed circuit. Sometimes they may have markings beside them. Shorting involves contacting both pads at the same time with something like a pair of metal tweezers, generally to reset the memory.
Not finding what you are looking for?
