Timex Expedition - Popular Questions, Answers, Tips & Manuals

Remove the battery and check the contacts at the bottom of the cavity to be sure they haven't gotten mashed flat. The cell should seat firmly in the cavity, not just rest in it. Be sure the back is seated firmly.

Timex Expedition... | 207 views | 0 helpful votes

Low battery can cause this type of fault! Make sure after changing the battery to do the all reset inside of the watch. If this does not work get in contact with Timex for how to have their watch sent for service.

Timex Expedition... | 108 views | 0 helpful votes

i would advise you to contact timex customer services .

Timex Expedition... | 516 views | 0 helpful votes

Janice, set vibration alarm to on expedition watch. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Enable Vibration Mode for Alarms on Timex Expedition W214 Wristwatch

Timex Expedition... | 640 views | 0 helpful votes

click the link below for timex manuals

Timex Expedition... | 214 views | 0 helpful votes

There is a process to make an all reset. After the reset try again. The user user manual can be downloaded from Timex. Make very sure the watch is absolutely flat and far from metal objects. Even being near most furniture can effect the reading because they can have metal springs. Many homes have a lot of metal in their construction. It's best to calibrate the compass out doors away from power wires or cars or anything metal. On the street you can have metal under the pavement.

If this does not work call Timex. There have been instances where the compass module or sensor had to be changed. I have the same watch. It's a very good one.

Timex Expedition... | 495 views | 0 helpful votes

Proabably it is "stuck". I often find that a sharp flick or two with my finger on the face of the watch will cause it to start running. Should not need "resetting".

Timex Expedition... | 175 views | 0 helpful votes

New batterys can go bad, that is why they have a warranty. Replace the battery

Timex Expedition... | 299 views | 0 helpful votes

You can if you have enough components in your pc...here is the link from wiki..go check out...


Timex Expedition... | 78 views | 0 helpful votes

Take it to you local jewler or Walmart for a suffient repair.

Timex Expedition... | 61 views | 0 helpful votes

Yesterday, I have just replaced new battery of CR 1620 but it gets no sound as you. I found that it must be resetted that I don't know how. I'm trying to find it out.

Timex Expedition... | 160 views | 0 helpful votes

Thank you for the member's advise that...Replace the back cover with the arrow on the back point directly at the stem. The Indiglo backlight, Alarms and Chimes should all work when all the back cover is in the correct position.
If it's at the wrong position of cover it'll not work correctly because the speaker or buzzer of your watch must be attached on the correct case back. Just try to fix it right!

Timex Expedition... | 139 views | 0 helpful votes

Send it back. It should be working whether you press a button or not. Either send it back or take it to get a battery.

Timex Expedition... | 76 views | 0 helpful votes

Jewelry store,dept. store ,or the manufacturer.

Timex Expedition... | 109 views | 0 helpful votes

push down on the battery it should click in if not use a small peace of seletape.

Timex Expedition... | 254 views | 0 helpful votes

Not finding what you are looking for?

-8,434 questions posted

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

The Knight
The Knight

Level 3 Expert

76321 Answers


Level 3 Expert

35285 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides