Thule Answered Questions & Fixed Issues

I did a lot of research on forums about this and wanted to consolidate the results:1. Don't use WD40, it attracts dust and grime later, use Silicon Spray or graphite dust2. The main reason I'm posting, once it's free to open, lubricate behind the sliding locking bars with Silicon Spray, this helps A LOT.3. Also consider what I did which helps 99% of the rest of the way: buy a couple feet of PVC, large enough to cover the sliding locking bars, cut it in half the long way, attach it to the box over the locking bars (I drilled holes and used zip ties).The only remaining issue I have now is if I pile stuff too high and it puts upward pressure on the box lid, so don't do that. ;-)As to the PVC, I think it was 1", and in fact it was not really big enough to completely cover the locking bars, so I didn't tighten the zip-ties down all the way, if I did it again I'd get bigger pipe or heat it and flatten it out a bit, but I just tested this setup on a 1200 mile trip and it worked great, noticeably smoother opening and closing.

The tire clamps down to the part circled in red, in the and the part of the bike between the pedals goes on the post being pointed to with the yellow arrow.

notify thule hardware--fasenel --online search

Question edited for clarity, full 'make model (what it is)'. Replacement videos in the link https://www.google.com/search?q=thule+hullavator++replace+air+springs ..

Looks like it is a 2" hook up.

I have no experience with the rack, but it's possible that the knob is slipping where it connects to the bolt that actually secures the rack. You may have to cut off the knob to remove the rack. I would contact Thule or a local dealer for advice, though. They should be willing to help with a $400 rack.

Thule customer service is excellent and they will be happy to give you the exact answer you are looking for.

www.thule.com

My first guess would be the speed sensor on the way out.

hello u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this .. im a frequent buyer there since Im a mechanic so take help from there

Easy Flow Gutter Guards are the only gutter guard in the world that can be attached to an existing 5k or 6k gutter system (This is the continuous aluminum gutter system most used in America today) without compromising the integrity of the roof. Easy Flow Gutter Guards attach under the flashing on the fascia boards, protecting the fascia from all contact with rain or other forms of moisture.

That's why they were sold

Utube

new bolt? or remove the rust on both my soaking in vinegar or a commercial solvent.

Today is not Saturday anywhere in the world. Also, if there's a bike shop near you they may be able to help. I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

If you can't figure it out ask a friend who's mechanical, go to a bike shop, or contact Thule: Thule - We love to hear from you I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

if it is brake or drum related best take it to an accredited brake specialist shop for drum machining or disc skimming it will take a proper diagnosis to determine what has to be done so get a quote

It's a trunk-mount rack, should not be too hard to figure out. Try a Google search for 'Thule 515-5033' and look at the IMAGES results to see examples of it mounted on a car. I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

The odds of someone here being able to solve your problem is near zero. Why not go to Thule.com or call using this info: Thule com Phone Number I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Why not just contact Thule?? https://www.thule.com/en-us/us/support/contact-us I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881