Techko Office Equipment & Supplies - Recent Questions, Troubleshooting & Support
Shredder won't power up
hI
Did you check your power connection well all the fuses?What brand of machine do you have?
The machine only works in reverse, but does not
Hi, well if it only works in reverse then often we have found that it is the actual F/R switch itself, It must be replaced, other times it is the forward, semiconductor drive, for the motor that's failed, these too must be replaced. I have found broken wires, on the switch also, this needs to be re-soldered..
If one can DIY, then one needs disassemble to test those parts and see if they are OK or not, and fix whats wrong.
If one isn't inclined to DIY, then please, simply take the unit into a reputable appliance repair shop, and ask for a "Quote"as to costings, and go from there.
Paper shredder
if not put together with tamper proof screws
take apart is possible to clear sensor area
and internal workings
IS this is an older model
i can find parts for sale on one of these
When bin was full, I emptied it only to find that my shredded no longer worked on auto, forward or reverse
Dear Sir,
Maybe, just maybe, I have an answer for you.
Somewhere on the part of your shredder that touches the bin, there is a tiny switch that touches the bin, and it is a safety switch that causes the shredder to stop working if the bin is removed.
In the shredder I have, and have had, the switch is usually plastic, and is the same color as the plastic body of the shredder.
Proper positioning of the bin to the "bottom" of the shredder is critical to it's working, as the bin presses on the switch to "close" it.
God bless your efforts.
I have a privay Guard model PS-029/MB and I have
I have the same problem. The gear that the motor drive shaft touches has been shredded to pieces. when contacting the second gear. The secondary gear is plastic and absolutely WILL shred itself to pieces over a short lifespan (<5yrs) because metal vs plastic is a losing combination.
Does this shredder activate when it senses paper being fed?
in the space where the paper goes to be shredded is a very small plastic level that is pushed sideways when the paper is put in
this lever is between two cutter blades and is easily jammed in the on position from paper bits
remover any paper around the center of the shredder that is blocking up the cutters
How do I unjam it?
Techko SH1524CP Shredder Fix jammed - Questions - Fixya
www.fixya.com > ... > Techko > Techko SH1524CP Shredder
fix a jammed shredder? Remove as much of the jam as possible then saturate anypaper left with shredder oil or you may use any liquid vegetable based
How to open
More information would be helpful. If you mean "open" the top portion where the motor is, you can find the answer you need by going on YOUTUBE and just type in what you are looking for.
Not finding what you are looking for?