Tatung Televison & Video - Answered Questions & Fixed Issues
Is the tatung v23cltt built in 2003 an hdtv?
Televisions that lack high definition will neither need nor have HDMI capability. Older televisions will not require the 1080p connection that HDMI provides. If yourtelevision is not a flat screen, LCD or plasma, then it will not have HDMI capability.
Tatung V27DMTT LCD TV (Evesham badged - UK) will not power up.
The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "
brand name" to your device; [Exclude the model number], in the "
Search box at the top right of the display window of the Homepage" to get gathered related posts.
Power supply pwb 0653 02
Tatung uses Sanyo kit in their TVs. Follow the instructions to Sanyo, after confirming about the IC numbers used in your TV. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Pull up older posts. Surf the site with patience.
Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/
How to setup tv with set top box
rca to rac or hdmi to hdmi cables then select av on the tv to which ever one you connect it to eg avi av2 av3 or hdmi 1 hdmi 2 etc
4/19/2014 4:55:55 AM •
Tatung...
•
Answered
on Apr 19, 2014
•
73 views
Turning off
If you have 3 capacitors bad, there are likely more that you missed.You didn't mention what kind of Flat Panel. If LCD, then check for the 5 volt supply. The caps are likely 220uF and 1000uF - 1500uF and all in the 16 volt range.
HDTV not picking up local channels
Look to see in menu if set is set to Air or Catv (cable) if on cable anything is possible 2-13 but above that no or almost no reception.
Not finding what you are looking for?