Tag Heuer 2000 - Answered Questions & Fixed Issues


Fake Tags are common! The only surefire way to tell if its real is by the movement! They use Swiss ETA movements. Fakes use Japanese movements! If you are purchasing this watch online...well good luck! If you can take it to a watch repair company then I would suggest that before you buy so they can open the case back and see what kind of movement is in it! A real Tag will cost upwards of $1500 plus and I would think a Limited Edition would be even more!

Good luck!

Tag Heuer 2000... | Answered on Oct 29, 2017 | 3,374 views


Here is the manual from GAP customer service.

Dear gap.com Customer,
Thank you for your email regarding the Sporty Printed Watch user
instructions. Please accept our apologies that no directions were
received with your order.
The instructions are as follows:
Button Functions:
A. Light
B. Mode
C. Start
D. Reset
Standard Time Adjustment:
1. To set the time, press the Mode button three times (The seconds and
the word Tuesday should start flashing).
2. If the seconds position shows less than 30 seconds, pressing the
Start button will reset the seconds to 00. If the seconds position shows
more than 30 seconds, pressing the Start button will reset the seconds
to 00 and the minutes will increase by 1.
3. Press the Reset button until the area you want to change starts
flashing (i.e., second, minute, hour, day, month, and weekend. Press
Start button once for per unit increment, press and hold for 3 seconds
for speedy advance.
4. At completion, press Mode button to resume standard time display.
To reset the Alarm:
Press the B: Mode button until you reach the alarm.
Press the D: Restart button.
Press the C: Restart button to get back to the time

Tag Heuer 2000... | Answered on Apr 02, 2017 | 15,132 views


Try manually winding it (assuming it's not a quartz watch). If a mechanical watch is not worn daily it will run down and need to be manually wound to get going. Turn the crown clockwise about 40 turns.

Tag Heuer... | Answered on Dec 10, 2016 | 192 views


Try the following, which I discovered by accident on my Tag Professional. Pull the crown out to the first position, and then you may find that successive pushes of the upper pushbutton will move one of the chrono hands by one division, and the lower pushbutton will move a different chrono hand. Similarly if you pull the crown out to the second position, the pushbuttons will control the other chrono hands. In this way you can set each of the chrono hands to their zero positions. Hope this works for you. Geoff

Tag Heuer... | Answered on Feb 26, 2019 | 24,146 views


Just the basic manual right? I have a website.

Tag Heuer 2000... | Answered on Mar 12, 2015 | 532 views


Hold right bottom button and then press right top button, while looking at tge watch face, this will toggle a little AL display indicator over the minutes digit

Tag Heuer 2000... | Answered on Mar 01, 2015 | 310 views


Just replaced a women's Aquaracer battery. It's a 364. Get the SR (silver oxide type) as it will last longer.

Tag Heuer... | Answered on Aug 05, 2014 | 224 views


Just replaced a women's Aquaracer battery. It's a 364. Get the SR (silver oxide type) as it will last longer.

Tag Heuer 2000... | Answered on Aug 05, 2014 | 1,858 views



this video will show you

Tag Heuer 2000... | Answered on Sep 06, 2013 | 1,528 views


I ALSO HAVE ONE...IT HAS A WHITE DIAL..LIKE BRAND NEW! 4_16_2013_4_07_57_pm.gif

Tag Heuer 2000... | Answered on Apr 16, 2013 | 1,018 views


An 'overhaul' as we say in watchmaking refers to completely disassembling your watch, repairing or replacing parts as necessary, cleaning the movement in a machine designed for cleaning watches, reassembly, regulating the timekeeping to the best of the watches ability, polishing or cleaning the case and band and possibly replacing the crystal if necessary. It varies slightly from brand, watchmaker, quartz or mechanical, pocket or wrist but generally this is what an overhaul refers to. It is a complete refurbishment of your watch.

Tag Heuer 2000... | Answered on Oct 08, 2012 | 277 views


The time setting screw is more accurately called the crown which is, in your case, a 'screw down crown'. This is done for water resistance. You must first unscrew the crown before you can pull it out. When you are finished setting the watch you must screw it back in. It may require that you press in on the crown and turn it at the same time to get the threads to catch. No need to overtighten it.

Tag Heuer 2000... | Answered on Oct 08, 2012 | 190 views


Your TAG is fitted with EOL (end of life) feature. This is the cause of that 4 seconds interval movement of seconds hand and thus indicating the time for battery replacement. The timekeeping is not affected by this- it is just warning to replace battery a.s.a.p.
Find your nearest watchmaker and ask for battery replacement.

Do not forget to rate, please.

Tag Heuer 2000... | Answered on Oct 08, 2012 | 3,583 views


Make sure the voltage on the new battery is correct. Just because a battery is new does not mean it is good. That is likely the problem.

Tag Heuer 2000... | Answered on Apr 23, 2012 | 2,322 views


Has it broken, or just been bent out of shape??? If it is just bent you could possibly take it to a TAG repairer or a watch maker to get it adjusted

Tag Heuer... | Answered on Jan 02, 2012 | 195 views


sounds like the crown stem may have snapped. Same happened to me and it had to be replaced at a cost of NZD$300. Have you bumped the watch or maybe tighted the stem too tight?

Tag Heuer... | Answered on Jan 02, 2012 | 143 views


does it have screw down crown if so you need to unscrew it anti clockwise once you do this you can set time etc if it does have screw down crown remember to scew it back its spring loaded so you need a little pressure if you dont it wont be water resistant..

Tag Heuer... | Answered on Jan 02, 2012 | 291 views


You need sharp nose pliers to unscrew the back and small screw driver to pry out the battery for direct replacement.Maybe 325 but you have to buy fresh ones from Radio Shack not drug stores.

Tag Heuer 2000... | Answered on Dec 22, 2011 | 183 views


This is most likely a metal band and the part you are talking about is the head piece. I do not know of any outlets that sale the head piece by itself. You will most likely have to buy a replacement band either from the watch manufacturer or an after market watch band supplier like Speidel.

Tag Heuer... | Answered on Nov 07, 2011 | 495 views

Not finding what you are looking for?

203 questions posted

Ask a Question

Usually answered in minutes!

Top Tag Heuer Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Bruce Robin

Level 2 Expert

300 Answers

Are you a Tag Heuer Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...